On Thu, 2010-07-01 at 10:41 +0200, Prafulla Wadaskar wrote: > > > -----Original Message----- > > From: u-boot-boun...@lists.denx.de > > [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Tor Krill > > Sent: Thursday, July 01, 2010 1:07 PM > > To: Albert Aribaud > > Cc: u-boot@lists.denx.de > > Subject: Re: [U-Boot] [PATCH] orion5x: edminiv2: add libata support > > > > On Wed, 2010-06-30 at 23:30 +0200, Albert Aribaud wrote: > > > Signed-off-by: Albert Aribaud <albert.arib...@free.fr> > > > --- > > > This patch: > > > - adds support in libata for the orion5x MVSATAHC controller; > > > - enables orion5x MVSTAHC port 1 on the edmini board; > > > - adds IDE and EXT2 commands to the edminiv2 command set. > > > > Just a heads up. I posted a patch with a sata-driver for kirkwood a > > while back. (We use this with our board and it seems to work fine) > > > > http://lists.denx.de/pipermail/u-boot/2010-June/073147.html > > I was just trying to test it, May I know relevant board configs?
On our board we have: /* * Disk configuration */ #define CONFIG_SATA_MV #define CONFIG_SYS_SATA_MAX_DEVICE 2 #ifdef CONFIG_SATA_MV #define CONFIG_LBA48 #define CONFIG_LIBATA #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION #define CONFIG_CMD_EXT2 #endif Hopefully i have not missed anything :) > > > > Which might have some similarities to the sata controller on orion. > > like egiga, we can think of having single sata driver for this. My thoughts to. /Tor _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
