> > This is version 4, which takes into account all feedback to date, and has > been rebased on the next branch. > > The folowing series adds support for two boards based upon the TI > OMAP4430. The OMAP4430 is a Cortex-A9 based SOC from TI. > > The first patch in this series renames the cpu arm_cortexa8 to armv7 so > that the existing cortex A8 code can be shared with cortex A9. Both A8 and > A9 are based on ARMV7 architecture. > > The 2nd patch adds basic OMAP4 architecture support. > > The 3rd patch restructures the OMAP mmc driver code so that it can be > shared by both OMAP3 and OMAP4 boards. This patch depends on a previously > submitted patch (OMAP: mmc: add support for second and third mmc channel): > > http://www.mail-archive.com/u-boot@lists.denx.de/msg31765.html > > The 4th patch restructures the OMAP i2c code so that it can be shared by > both OMAP3 and OMAP4 boards. > > And, finally, the 5th and 6th patches add board support for Panda and SDP. > > I build tested each step of the series for all ARMV7 boards (devkit8000 > mx51evk omap3_beagle omap3_overo omap3_evm omap3_pandora omap3_sdp3430 > omap3_zoom1 omap3_zoom2 smdkc100) > > I did a run test at each step of the series for Overo to verify no > regressions on an existing board. Of couse I also run test the final two > steps of the series on SDP and Panda. > > --- > > Steve Sakoman (6): > ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 > ARMV7: Add basic support for TI OMAP4 > ARMV7: Restructure OMAP mmc driver to allow code sharing between > OMAP3 and OMAP4 > ARMV7: Restructure OMAP i2c driver to allow code sharing between > OMAP3 and OMAP4 > ARMV7: Add support for TI OMAP4430 SDP > ARMV7: Add support for TI OMAP4 Panda
I ran MAKEALL for ARMV7 and I got several compile errors. I have setup a testing branch for you(u-boot-ti/testing) with all the patches applied. Please fix and resubmit. Thanks, Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
