Am 28.08.19 um 08:38 schrieb Weijie Gao: > This patch adds pinctrl driver, clock gate driver and reset controller > support for defconfig files of mtmips boards. > > Signed-off-by: Weijie Gao <weijie....@mediatek.com> > --- > configs/gardena-smart-gateway-mt7688_defconfig | 6 ++++++ > configs/linkit-smart-7688_defconfig | 6 ++++++ > 2 files changed, 12 insertions(+) > > diff --git a/configs/gardena-smart-gateway-mt7688_defconfig > b/configs/gardena-smart-gateway-mt7688_defconfig > index 1e270cb61d..83e793042a 100644 > --- a/configs/gardena-smart-gateway-mt7688_defconfig > +++ b/configs/gardena-smart-gateway-mt7688_defconfig > @@ -49,6 +49,7 @@ CONFIG_NET_RANDOM_ETHADDR=y > CONFIG_HAVE_BLOCK_DEVICE=y > CONFIG_BOOTCOUNT_LIMIT=y > CONFIG_CLK=y > +CONFIG_CLK_MTMIPS_GATE=y > CONFIG_LED=y > CONFIG_LED_BLINK=y > CONFIG_LED_GPIO=y > @@ -67,10 +68,15 @@ CONFIG_PHYLIB=y > CONFIG_PHY_FIXED=y > CONFIG_MT7628_ETH=y > CONFIG_PHY=y > +CONFIG_PINCTRL=y > +CONFIG_PINMUX=y > +CONFIG_PINCONF=y > +CONFIG_PINCTRL_MT7628=y > CONFIG_POWER_DOMAIN=y > CONFIG_RAM=y > CONFIG_DM_RESET=y > # CONFIG_SPL_SERIAL_PRESENT is not set > +CONFIG_RESET_MTMIPS=y
if the SoC only works with those drivers enabled, you should consider to select all according Kconfig symbols in arch/mips/mach-mtmips/Kconfig so an user can't configure a non-working board config by mistake. > CONFIG_MTK_SERIAL=y > CONFIG_SPI=y > CONFIG_MT7621_SPI=y > diff --git a/configs/linkit-smart-7688_defconfig > b/configs/linkit-smart-7688_defconfig > index 743cc48166..13f5cf8a21 100644 > --- a/configs/linkit-smart-7688_defconfig > +++ b/configs/linkit-smart-7688_defconfig > @@ -40,6 +40,7 @@ CONFIG_NET_RANDOM_ETHADDR=y > # CONFIG_DM_DEVICE_REMOVE is not set > CONFIG_BLK=y > CONFIG_CLK=y > +CONFIG_CLK_MTMIPS_GATE=y > CONFIG_LED=y > CONFIG_LED_BLINK=y > CONFIG_LED_GPIO=y > @@ -55,10 +56,15 @@ CONFIG_PHY_FIXED=y > CONFIG_MT7628_ETH=y > CONFIG_PHY=y > CONFIG_MT76X8_USB_PHY=y > +CONFIG_PINCTRL=y > +CONFIG_PINMUX=y > +CONFIG_PINCONF=y > +CONFIG_PINCTRL_MT7628=y > CONFIG_POWER_DOMAIN=y > CONFIG_RAM=y > CONFIG_DM_RESET=y > # CONFIG_SPL_SERIAL_PRESENT is not set > +CONFIG_RESET_MTMIPS=y > CONFIG_MTK_SERIAL=y > CONFIG_SPI=y > CONFIG_MT7621_SPI=y > -- - Daniel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
