Hi Stefano,
On Thu, Aug 1, 2019, 16:19 Stefano Babic <sba...@denx.de> wrote:
> On 24/07/19 14:19, Igor Opaniuk wrote:
> > Hi Stefan
> >
> > On Wed, Jul 24, 2019 at 2:32 PM Stefan Agner <ste...@agner.ch> wrote:
> >>
> >> On 2019-07-03 15:50, Igor Opaniuk wrote:
> >>> From: Igor Opaniuk <igor.opan...@toradex.com>
> >>>
> >>> NXP downstream kernel uses legacy method to enable other cores,
> >>> which requires kernel to run in a security mode (althought upstream
> kernel
> >>> uses PSCI for this).
> >>>
> >>> As we're using NXP kernel in our BSPs, lets enable this by default.
> >>
> >> I think I mentioned it internally, but just to be clear: I do not agree
> >> with this patch.
> >>
> >> Upstream U-Boot should be able to boot upstream Linux. I'd rather prefer
> >> to carry that patch in our downstream fork (or set the bootm_boot_mode
> >> environment in our boot script).
> >
> > Totally agree with you here,
> > BTW, seems that Stefano has applied by mistake to u-boot-imx
> > fcc79eee14("colibri_imx7_emmc: enable CONFIG_ARMV7_BOOT_SEC_DEFAULT"),
> > although I've asked to ignore it.
>
> Sorry for this - I have taken a look and I drop this one but I took
> fcc79eee14. Should I simply revert it on u-boot-imx (you do not need to
> send a patch, then)?
>
Yes, please revert this patch, as it brakes boot of the mainline kernel.
Thanks!
> Regards,
> Stefano
>
> >
> > Probably will send another patch that reverts this.
> >
> >>
> >> --
> >> Stefan
> >>
> >>>
> >>> Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
> >>> ---
> >>>
> >>> include/configs/colibri_imx7.h | 3 ++-
> >>> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/include/configs/colibri_imx7.h
> b/include/configs/colibri_imx7.h
> >>> index 40173b18fa..5408577661 100644
> >>> --- a/include/configs/colibri_imx7.h
> >>> +++ b/include/configs/colibri_imx7.h
> >>> @@ -164,7 +164,8 @@
> >>> "${board}/flash_blk.img && source ${loadaddr}\0" \
> >>> "setup=setenv setupargs " \
> >>> "console=tty1 console=${console}" \
> >>> - ",${baudrate}n8 ${memargs} consoleblank=0\0" \
> >>> + ",${baudrate}n8 ${memargs} consoleblank=0; " \
> >>> + "setenv bootm_boot_mode sec\0" \
> >>> "setupdate=run setsdupdate || run setusbupdate || run
> setethupdate\0" \
> >>> "setusbupdate=usb start && setenv interface usb && " \
> >>> "fatload ${interface} 0:1 ${loadaddr} " \
> >
> >
> >
>
>
> --
> =====================================================================
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
> =====================================================================
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
