Hi Stefan

On Wed, Jul 24, 2019 at 2:32 PM Stefan Agner <ste...@agner.ch> wrote:
>
> On 2019-07-03 15:50, Igor Opaniuk wrote:
> > From: Igor Opaniuk <igor.opan...@toradex.com>
> >
> > NXP downstream kernel uses legacy method to enable other cores,
> > which requires kernel to run in a security mode (althought upstream kernel
> > uses PSCI for this).
> >
> > As we're using NXP kernel in our BSPs, lets enable this by default.
>
> I think I mentioned it internally, but just to be clear: I do not agree
> with this patch.
>
> Upstream U-Boot should be able to boot upstream Linux. I'd rather prefer
> to carry that patch in our downstream fork (or set the bootm_boot_mode
> environment in our boot script).

Totally agree with you here,
BTW, seems that Stefano has applied by mistake to u-boot-imx
fcc79eee14("colibri_imx7_emmc: enable CONFIG_ARMV7_BOOT_SEC_DEFAULT"),
although I've asked to ignore it.

Probably will send another patch that reverts this.

>
> --
> Stefan
>
> >
> > Signed-off-by: Igor Opaniuk <igor.opan...@toradex.com>
> > ---
> >
> >  include/configs/colibri_imx7.h | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
> > index 40173b18fa..5408577661 100644
> > --- a/include/configs/colibri_imx7.h
> > +++ b/include/configs/colibri_imx7.h
> > @@ -164,7 +164,8 @@
> >               "${board}/flash_blk.img && source ${loadaddr}\0" \
> >       "setup=setenv setupargs " \
> >               "console=tty1 console=${console}" \
> > -             ",${baudrate}n8 ${memargs} consoleblank=0\0" \
> > +             ",${baudrate}n8 ${memargs} consoleblank=0; " \
> > +             "setenv bootm_boot_mode sec\0" \
> >       "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" 
> > \
> >       "setusbupdate=usb start && setenv interface usb && " \
> >               "fatload ${interface} 0:1 ${loadaddr} " \



-- 
Best regards - Freundliche GrĂ¼sse - Meilleures salutations

Igor Opaniuk

mailto: igor.opan...@gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to