Hi folks, Just curious if you ever faced any issues with HABv4 based secure boot on iMX7 SoC-based boards + NAND + mainline U-Boot (although it works perfectly when booting from eMMC).
I'm currently playing with it on Colibri iMX7 NAND version, following all steps from [1], (colibri_imx7_defconfig, where CONFIG_SECURE_BOOT=y and CONFIG_FSL_CAAM=y, without these two options enabled it's booting ok) and facing the same issue as explained in one of NXP forum threads [2]. Taking into account that default BootROM doesn't provide any output at all to the serial console it is like looking for a needle in a haystack. Do you have any ideas about possible pitfalls/what could be missing in this puzzle? Or at least some hints where to look into? Thanks in advance! [1] https://gitlab.denx.de/u-boot/u-boot/blob/master/doc/imx/habv4/guides/mx6_mx7_secure_boot.txt [2] https://community.nxp.com/thread/380130 -- Best regards - Freundliche Grüsse - Meilleures salutations Igor Opaniuk mailto: igor.opan...@gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
