On 29/07/19 10:18 PM, Suman Anna wrote: > The K3 System Controller driver is used for loading and starting > the System Firmware, and is used only on R5 SPL. It need not be > enabled and built for the A53 U-Boot and SPL, so disable it from > both the GP and HS AM65x A53 defconfigs. > > While at this, also remove the unneeded CONFIG_SPL_REMOTEPROC and > CONFIG_CMD_REMOTEPROC as no remoteprocs are now loaded from A53 SPL. > > Signed-off-by: Suman Anna <s-a...@ti.com> > --- > configs/am65x_evm_a53_defconfig | 3 --- > configs/am65x_hs_evm_a53_defconfig | 3 --- > 2 files changed, 6 deletions(-) > > diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig > index 2cf3a693fc70..d43df6a18765 100644 > --- a/configs/am65x_evm_a53_defconfig > +++ b/configs/am65x_evm_a53_defconfig > @@ -28,14 +28,12 @@ CONFIG_SPL_I2C_SUPPORT=y > CONFIG_SPL_DM_MAILBOX=y > CONFIG_SPL_DM_RESET=y > CONFIG_SPL_POWER_DOMAIN=y > -CONFIG_SPL_REMOTEPROC=y > CONFIG_SPL_YMODEM_SUPPORT=y > CONFIG_CMD_ASKENV=y > # CONFIG_CMD_FLASH is not set > CONFIG_CMD_GPT=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > -CONFIG_CMD_REMOTEPROC=y
CMD_REMOTEPROC will definitely be used in very near future. Please retain this. Rest looks good to me. Thanks and regards, Lokesh > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > # CONFIG_ISO_PARTITION is not set > @@ -79,7 +77,6 @@ CONFIG_SPL_PINCTRL=y > CONFIG_PINCTRL_SINGLE=y > CONFIG_POWER_DOMAIN=y > CONFIG_TI_SCI_POWER_DOMAIN=y > -CONFIG_K3_SYSTEM_CONTROLLER=y > CONFIG_DM_RESET=y > CONFIG_RESET_TI_SCI=y > CONFIG_DM_SERIAL=y > diff --git a/configs/am65x_hs_evm_a53_defconfig > b/configs/am65x_hs_evm_a53_defconfig > index 48b28b390ef1..8ac16f0372e4 100644 > --- a/configs/am65x_hs_evm_a53_defconfig > +++ b/configs/am65x_hs_evm_a53_defconfig > @@ -31,13 +31,11 @@ CONFIG_SPL_I2C_SUPPORT=y > CONFIG_SPL_DM_MAILBOX=y > CONFIG_SPL_DM_RESET=y > CONFIG_SPL_POWER_DOMAIN=y > -CONFIG_SPL_REMOTEPROC=y > CONFIG_SPL_YMODEM_SUPPORT=y > CONFIG_CMD_ASKENV=y > # CONFIG_CMD_FLASH is not set > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > -CONFIG_CMD_REMOTEPROC=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > # CONFIG_ISO_PARTITION is not set > @@ -76,7 +74,6 @@ CONFIG_SPL_PINCTRL=y > CONFIG_PINCTRL_SINGLE=y > CONFIG_POWER_DOMAIN=y > CONFIG_TI_SCI_POWER_DOMAIN=y > -CONFIG_K3_SYSTEM_CONTROLLER=y > CONFIG_DM_RESET=y > CONFIG_RESET_TI_SCI=y > CONFIG_DM_SERIAL=y > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
