Hi Vladimir, On Mon, Jul 15, 2019 at 5:46 PM Vladimir Oltean <olte...@gmail.com> wrote: > > On Mon, 15 Jul 2019 at 05:18, Bin Meng <bmeng...@gmail.com> wrote: > > > > Hi Vladimir, > > > > On Mon, Jul 15, 2019 at 4:04 AM Vladimir Oltean <olte...@gmail.com> wrote: > > > > > > Hi Bin, > > > > > > On Sat, 13 Jul 2019 at 08:05, Bin Meng <bmeng...@gmail.com> wrote: > > > > > > > > Hi Vladimir, > > > > > > > > On Mon, Jun 24, 2019 at 1:50 AM Vladimir Oltean <olte...@gmail.com> > > > > wrote: > > > > > > > > > > From: Jianchao Wang <jianchao.w...@nxp.com> > > > > > > > > > > The LS1021A-TSN is a development board built by VVDN/Argonboards in > > > > > partnership with NXP. > > > > > > > > > > It features the LS1021A SoC and the first-generation SJA1105T Ethernet > > > > > switch for prototyping implementations of a subset of IEEE 802.1 TSN > > > > > standards. > > > > > > > > > > Supported boot media: microSD card (via SPL), QSPI flash. > > > > > > > > > > Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which > > > > > is 64 MB in size and has an erase sector size of 256KB (therefore, > > > > > flashing the RCW would erase part of U-boot). > > > > > > > > nits: U-Boot > > > > > > > > > > Why don't you add a rule to scripts/checkpatch.pl that warns on > > > improper spelling of U-Boot? It would save a lot of time on both ends. > > > > > > > Yep, I once tried to add some misspelled word list of U-Boot to > > spelling, but checkpatch would generate lots of false-positive > > warnings (like u-boot.bin) so I gave it up. It seems that we need add > > some special handling of U-Boot spelling in checkpatch? Do you have > > better idea? > > > > Ok, so I see that scripts/spelling.txt is case-insensitive, which > doesn't work for what you want. I guess it just doesn't matter that > much then?
Yes, it's case-insensitive, so it generates too many false-positive warnings and I believe that may annoy people :) > If it does matter to you, one way would be to add explicit checks in > the checkpatch script itself. I did not want to do that as the checkpath script is synced up from Linux kernel upstream, and no U-Boot special handling should be applied. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
