On 7/12/2019 9:44 AM, Bin Meng wrote:
Hi Alex,
On Fri, Jul 12, 2019 at 2:39 PM Alex Marginean
<alexandru.margin...@nxp.com> wrote:
Adds a short bindings document describing the expected structure of a MDIO
MUX dts node. This is based on Linux binding and the example is in fact
copied from there.
Signed-off-by: Alex Marginean <alexm.ossl...@gmail.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
---
Changes in v2:
- no change
Changes in v3:
- no change, just fighting with the email server
Changes in v4:
- pulled in full binding example from Linux, added a note on why
mdio-parent-bus is currently required in U-boot but not in Linux
Changes in v5:
- fixed a few typos, a multi-line comment format
doc/device-tree-bindings/net/mdio-mux.txt | 138 ++++++++++++++++++++++
1 file changed, 138 insertions(+)
create mode 100644 doc/device-tree-bindings/net/mdio-mux.txt
diff --git a/doc/device-tree-bindings/net/mdio-mux.txt
b/doc/device-tree-bindings/net/mdio-mux.txt
new file mode 100644
index 0000000000..b87efe9535
--- /dev/null
+++ b/doc/device-tree-bindings/net/mdio-mux.txt
@@ -0,0 +1,138 @@
+The expected structure of an MDIO MUX device tree node is described here. This
+is heavily based on current Linux specification.
+One notable difference to Linux is that mdio-parent-bus is currently required
+by U-boot, not optional as is in Linux. Current U-boot MDIO MUX udevice class
Sorry but I was saying "U-Boot" :) too nitpicking I am :)
oops, I'll send a v6 :)
[snip]
Regards,
Bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
