Hi Alex, On Fri, Jul 12, 2019 at 2:39 PM Alex Marginean <alexandru.margin...@nxp.com> wrote: > > Adds a short bindings document describing the expected structure of a MDIO > MUX dts node. This is based on Linux binding and the example is in fact > copied from there. > > Signed-off-by: Alex Marginean <alexm.ossl...@gmail.com> > Acked-by: Joe Hershberger <joe.hershber...@ni.com> > Reviewed-by: Bin Meng <bmeng...@gmail.com> > --- > > Changes in v2: > - no change > Changes in v3: > - no change, just fighting with the email server > Changes in v4: > - pulled in full binding example from Linux, added a note on why > mdio-parent-bus is currently required in U-boot but not in Linux > Changes in v5: > - fixed a few typos, a multi-line comment format > > doc/device-tree-bindings/net/mdio-mux.txt | 138 ++++++++++++++++++++++ > 1 file changed, 138 insertions(+) > create mode 100644 doc/device-tree-bindings/net/mdio-mux.txt > > diff --git a/doc/device-tree-bindings/net/mdio-mux.txt > b/doc/device-tree-bindings/net/mdio-mux.txt > new file mode 100644 > index 0000000000..b87efe9535 > --- /dev/null > +++ b/doc/device-tree-bindings/net/mdio-mux.txt > @@ -0,0 +1,138 @@ > +The expected structure of an MDIO MUX device tree node is described here. > This > +is heavily based on current Linux specification. > +One notable difference to Linux is that mdio-parent-bus is currently required > +by U-boot, not optional as is in Linux. Current U-boot MDIO MUX udevice > class
Sorry but I was saying "U-Boot" :) too nitpicking I am :) [snip] Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
