When CONFIG_CLK enabled, use CLK UCLASS for clk related settings.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/include/asm/mach-imx/mxc_i2c.h | 6 ++++++
drivers/i2c/mxc_i2c.c | 17 +++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h
b/arch/arm/include/asm/mach-imx/mxc_i2c.h
index 8e1ea9af19..81fd981444 100644
--- a/arch/arm/include/asm/mach-imx/mxc_i2c.h
+++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h
@@ -6,6 +6,9 @@
#define __ASM_ARCH_MXC_MXC_I2C_H__
#include <asm-generic/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
+#if CONFIG_IS_ENABLED(CLK)
+#include <clk.h>
+#endif
struct i2c_pin_ctrl {
iomux_v3_cfg_t i2c_mode;
@@ -47,6 +50,9 @@ struct mxc_i2c_bus {
ulong driver_data;
int speed;
struct i2c_pads_info *pads_info;
+#if CONFIG_IS_ENABLED(CLK)
+ struct clk per_clk;
+#endif
#ifndef CONFIG_DM_I2C
int (*idle_bus_fn)(void *p);
void *idle_bus_data;
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 23119cce65..2e157bca58 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -890,9 +890,22 @@ static int mxc_i2c_probe(struct udevice *bus)
i2c_bus->bus = bus;
/* Enable clk */
+#if CONFIG_IS_ENABLED(CLK)
+ ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk);
+ if (ret) {
+ printf("Failed to get i2c clk\n");
+ return ret;
+ }
+ ret = clk_enable(&i2c_bus->per_clk);
+ if (ret) {
+ printf("Failed to enable i2c clk\n");
+ return ret;
+ }
+#else
ret = enable_i2c_clk(1, bus->seq);
if (ret < 0)
return ret;
+#endif
/*
* See Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -919,7 +932,11 @@ static int mxc_i2c_probe(struct udevice *bus)
ret = i2c_idle_bus(i2c_bus);
if (ret < 0) {
/* Disable clk */
+#if CONFIG_IS_ENABLED(CLK)
+ clk_disable(&i2c_bus->per_clk);
+#else
enable_i2c_clk(0, bus->seq);
+#endif
return ret;
}
--
2.16.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
