From: Bin Meng <bmeng...@gmail.com> Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it.
This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/ Signed-off-by: Bin Meng <bmeng...@gmail.com> [Vladimir] Made the following changes: - Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi - Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 - a mistake ported over from Linux. Each SGMII PCS lies on the private MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS). Signed-off-by: Vladimir Oltean <olte...@gmail.com> --- arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +- arch/arm/cpu/armv7/ls102xa/fdt.c | 10 ++++++++ arch/arm/dts/ls1021a-twr.dtsi | 32 +++++++++++++++++++++++++ arch/arm/dts/ls1021a.dtsi | 28 ++++++++++++++++++++-- board/freescale/ls1021atwr/ls1021atwr.c | 2 +- configs/ls1021atwr_nor_defconfig | 1 + configs/ls1021atwr_nor_lpuart_defconfig | 1 + include/configs/ls1021atwr.h | 4 ++++ 8 files changed, 76 insertions(+), 4 deletions(-) diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index ecf9e869855e..9ccfe1042ce5 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -296,7 +296,7 @@ int cpu_mmc_init(bd_t *bis) int cpu_eth_init(bd_t *bis) { -#ifdef CONFIG_TSEC_ENET +#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH) tsec_standard_init(bis); #endif diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 8bf9c42b2260..90cf7958f257 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -16,12 +16,17 @@ #include <tsec.h> #include <asm/arch/immap_ls102xa.h> #include <fsl_sec.h> +#include <dm.h> DECLARE_GLOBAL_DATA_PTR; void ft_fixup_enet_phy_connect_type(void *fdt) { +#ifndef CONFIG_DM_ETH struct eth_device *dev; +#else + struct udevice *dev; +#endif struct tsec_private *priv; const char *enet_path, *phy_path; char enet[16]; @@ -29,7 +34,12 @@ void ft_fixup_enet_phy_connect_type(void *fdt) int phy_node; int i = 0; uint32_t ph; +#ifndef CONFIG_DM_ETH char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" }; +#else + char *name[3] = { "ethernet@2d10000", "ethernet@2d50000", + "ethernet@2d90000" }; +#endif for (; i < ARRAY_SIZE(name); i++) { dev = eth_get_dev_by_name(name[i]); diff --git a/arch/arm/dts/ls1021a-twr.dtsi b/arch/arm/dts/ls1021a-twr.dtsi index 5d3275ced913..27c96f95400a 100644 --- a/arch/arm/dts/ls1021a-twr.dtsi +++ b/arch/arm/dts/ls1021a-twr.dtsi @@ -51,6 +51,26 @@ }; }; +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + &i2c0 { status = "okay"; }; @@ -84,12 +104,24 @@ sgmii_phy0: ethernet-phy@0 { reg = <0x0>; }; + rgmii_phy1: ethernet-phy@1 { reg = <0x1>; }; + sgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ tbi1: tbi-phy@1f { reg = <0x1f>; device_type = "tbi-phy"; diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi index 8a0f473e25ca..c274a302d358 100644 --- a/arch/arm/dts/ls1021a.dtsi +++ b/arch/arm/dts/ls1021a.dtsi @@ -350,14 +350,38 @@ <&platform_clk 1>; }; + enet0: ethernet@2d10000 { + compatible = "fsl,tsec"; + reg = <0x2d10000 0x1000>; + status = "disabled"; + }; + + enet1: ethernet@2d50000 { + compatible = "fsl,tsec"; + reg = <0x2d50000 0x1000>; + status = "disabled"; + }; + + enet2: ethernet@2d90000 { + compatible = "fsl,tsec"; + reg = <0x2d90000 0x1000>; + status = "disabled"; + }; + mdio0: mdio@2d24000 { - compatible = "gianfar"; - device_type = "mdio"; + compatible = "fsl,tsec-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x2d24000 0x4000>; }; + mdio1: mdio@2d64000 { + compatible = "fsl,tsec-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2d64000 0x4000>; + }; + usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x8600000 0x1000>; diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 01ba1bc96213..a4ff0b7bc7eb 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -248,7 +248,7 @@ int board_mmc_init(bd_t *bis) int board_eth_init(bd_t *bis) { -#ifdef CONFIG_TSEC_ENET +#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH) struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[4]; int num = 0; diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index 9d8c2024c04e..3c9cf9a8c909 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -40,6 +40,7 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y CONFIG_PCI=y CONFIG_DM_PCI=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index b9cfdb6fd69e..762af87b0dd3 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -42,6 +42,7 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MII=y +CONFIG_DM_ETH=y CONFIG_TSEC_ENET=y CONFIG_PCI=y CONFIG_DM_PCI=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index de0c9c7f26af..c967be3a6fce 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -260,6 +260,7 @@ */ #ifdef CONFIG_TSEC_ENET +#ifndef CONFIG_DM_ETH #define CONFIG_MII_DEFAULT_TSEC 1 #define CONFIG_TSEC1 1 #define CONFIG_TSEC1_NAME "eTSEC1" @@ -287,6 +288,9 @@ #define CONFIG_HAS_ETH0 #define CONFIG_HAS_ETH1 #define CONFIG_HAS_ETH2 +#else +#define CONFIG_ETHPRIME "ethernet@2d10000" +#endif #endif /* PCIe */ -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
