On 10/06/19 23:36, Lukasz Majewski wrote: > Hi Stefano, > >>> This commit brings the files from Linux kernel to provide clocks >>> support as it is used on the Linux kernel with common clock >>> framework [CCF] setup. The directory structure has been preserved. >>> The ported code only supports reading information from PLL, MUX, >>> Divider, etc and enabling/disabling the clocks USDHCx/ECSPIx >>> depending on used bus. Moreover, it is agnostic to the alias >>> numbering as the information about the clock is read from device >>> tree. One needs to pay attention to the comments indicating >>> necessary for U-boot's DM changes. >>> If needed the code can be extended to support the "set" part of the >>> clock management. >>> Signed-off-by: Lukasz Majewski <lu...@denx.de> >> >> Applied to u-boot-imx, master, thanks ! > > Thanks for pulling this code, but the v4 is not the final one. > > Simon had some comments regarding the overall design and architecture > of this port. Unfortunately I did not have time to address them yet. >
Ouch...I have not seen this, my mistake ! > I'm planning to do it ASAP, but IMHO it would be best to drop this > series (so the final one would be applied from the outset). > Right - I will drop the series, even if this means a rebase for u-boot-imx. > Sorry for trouble. > Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
