On Wed, May 1, 2019 at 5:36 PM Marek Vasut <marek.va...@gmail.com> wrote: > > According to the R-Car Gen3 Hardware Manual Rev 1.50 of Nov 30, 2018, the > TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) or D3 > (r8a77995). > > Avoid setting the APSR:TDM bit on these SoCs. Moreover, only set APSR:TDM > when the DT explicitly specifies RGMII ID or TXID mode instead of setting > it unconditionally when the PHY link speed is 1000 Mbit/s. > > Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com> > Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org> > Cc: Joe Hershberger <joe.hershber...@ni.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
