Hey folks, I'm attempting, again, to see what we need to do in order to use gcc-8.x for U-Boot and ran into, again: https://patchwork.ozlabs.org/patch/920329/ which in short is that when using -mcpu=xscale gcc-8.x throws an odd error: cc1: error: switch -mcpu=xscale conflicts with -march=armv5te switch [-Werror]
Now note, U-Boot isn't passing -march= at all, just -mcpu=xscale which
suggests perhaps something broke in upstream gcc. Looking at the
kernel, it's not used -mcpu=xscale ever, just -mtune=xscale but that
leads to different failures (seen here with gcc-7.3):
CC drivers/usb/gadget/pxa25x_udc.o
{standard input}: Assembler messages:
{standard input}:779: Error: selected processor does not support `pld [lr]' in
ARM mode
{standard input}:1201: Error: selected processor does not support `pld [r7]' in
ARM mode
{standard input}:2519: Error: selected processor does not support `pld [r3]' in
ARM mode
{standard input}:2796: Error: selected processor does not support `pld [r3]' in
ARM mode
So, what should we do about this? Is there still active interest in
supporting the PXA platforms? Thanks folks!
--
Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
