From: Chen-Yu Tsai <w...@csie.org> Hi everyone,
This series enables EMAC (Ethernet controller) on two A83T boards, the Cubietruck Plus and Bananapi M3. This series is now based on sunxi/next, which has patches that convert sun8i-emac to use the common CLK and DM_RESET framework. The two patches enable the sun8i-emac and Realtek PHY driver in their respective defconfigs. The device trees already have the EMAC enabled. For the Bananapi M3, the regulator providing the I/O voltages is raised to 3.3V. This was tested with the "dhcp" command followed by using the "ping" command to ping an external IP, in this case 8.8.8.8. Regards ChenYu Changes in v3: - Rebased on sunxi/master Changes in v2: - Dropped clk/reset related changes in favor of DM CLK / RESET support - Raised DLDO3 for RGMII I/O on Bananapi M3 to 3.3V per design Chen-Yu Tsai (2): sunxi: Enable EMAC on the Cubietruck Plus sunxi: Enable EMAC on the Bananapi M3 configs/Cubietruck_plus_defconfig | 2 ++ configs/Sinovoip_BPI_M3_defconfig | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) -- 2.20.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
