Hi lukas
Auer, Lukas <lukas.a...@aisec.fraunhofer.de> 於 2019年4月29日 週一 下午7:55寫道：
>
> Hi Rick,
>
> On Mon, 2019-04-29 at 15:44 +0800, Andes wrote:
> > From: Rick Chen <r...@andestech.com>
> >
> > This patch will fix prior_stage_fdt_address write failure problem, when
> > AE350 boots from flash.
> >
> > When AE350 boots from flash, prior_stage_fdt_address will be flash
> > address, we shall avoid it to be written.
> >
> > Signed-off-by: Rick Chen <r...@andestech.com>
> > Cc: Greentime Hu <greent...@andestech.com>
> > ---
> > arch/riscv/cpu/cpu.c | 2 ++
> > arch/riscv/cpu/start.S | 2 ++
> > board/AndesTech/ax25-ae350/ax25-ae350.c | 4 ----
> > include/configs/ax25-ae350.h | 2 +-
> > 4 files changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
> > index 0cfd7d6..e9a8b43 100644
> > --- a/arch/riscv/cpu/cpu.c
> > +++ b/arch/riscv/cpu/cpu.c
> > @@ -15,7 +15,9 @@
> > * The variables here must be stored in the data section since they are
> > used
> > * before the bss section is available.
> > */
> > +#ifdef CONFIG_OF_PRIOR_STAGE
> > phys_addr_t prior_stage_fdt_address __attribute__((section(".data")));
> > +#endif
> > #ifndef CONFIG_XIP
> > u32 hart_lottery __attribute__((section(".data"))) = 0;
> >
> > diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
> > index 3402d09..60ac8c6 100644
> > --- a/arch/riscv/cpu/start.S
> > +++ b/arch/riscv/cpu/start.S
> > @@ -111,8 +111,10 @@ call_board_init_f_0:
> > bnez tp, secondary_hart_loop
> > #endif
> >
> > +#ifdef CONFIG_OF_PRIOR_STAGE
> > la t0, prior_stage_fdt_address
> > SREG s1, 0(t0)
> > +#endif
> >
> > jal board_init_f_init_reserve
> >
> > diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c
> > b/board/AndesTech/ax25-ae350/ax25-ae350.c
> > index d343453..3d65ce7 100644
> > --- a/board/AndesTech/ax25-ae350/ax25-ae350.c
> > +++ b/board/AndesTech/ax25-ae350/ax25-ae350.c
> > @@ -67,10 +67,6 @@ ulong board_flash_get_legacy(ulong base, int banknum,
> > flash_info_t *info)
> >
> > void *board_fdt_blob_setup(void)
> > {
> > - void **ptr = (void *)&prior_stage_fdt_address;
> > - if (fdt_magic(*ptr) == FDT_MAGIC)
> > - return (void *)*ptr;
> > -
>
> Please move this change and the following into a separate patch.
>
> You may also try to use CONFIG_OF_SEPARATE instead of CONFIG_OF_BOARD.
> As far as I know, this is the recommended configuration and with this
> change, I don't think CONFIG_OF_BOARD is needed anymore.
>
OK.
I will move it into a separate patch and use CONFIG_OF_SEPARATE.
Thanks
Rick
> Thanks,
> Lukas
>
> > return (void *)CONFIG_SYS_FDT_BASE;
> > }
> >
> > diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
> > index 395f3a4..a4037f3 100644
> > --- a/include/configs/ax25-ae350.h
> > +++ b/include/configs/ax25-ae350.h
> > @@ -40,7 +40,7 @@
> > #define CONFIG_SYS_MALLOC_LEN (512 << 10)
> >
> > /* DT blob (fdt) address */
> > -#define CONFIG_SYS_FDT_BASE 0x000f0000
> > +#define CONFIG_SYS_FDT_BASE 0x800f0000
> >
> > /*
> > * Physical Memory Map
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
