[U-Boot] [PATCH v2 1/3] arm: dts: h6: sync with dts with Linux sunxi

[Clément Péron]

There are some differences between U-Boot and Linux device tree files.

Sync only the minor changes.

6ba2e45d57af - arm64: dts: allwinner: h6: move MMC pinctrl to dtsi <Clément 
Péron>
54eac67bbe3a - arm64: dts: allwinner: Fix pinctrl node names <Maxime Ripard>
31af04cd60d3 - arm64: dts: Remove inconsistent use of 'arm,armv8' compatible 
string <Rob Herring>

Signed-off-by: Clément Péron <peron.c...@gmail.com>
---
 arch/arm/dts/sun50i-h6-orangepi.dtsi |  2 --
 arch/arm/dts/sun50i-h6-pine-h64.dts  |  4 ----
 arch/arm/dts/sun50i-h6.dtsi          | 16 ++++++++++------
 3 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi 
b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index 0612c19cd9..3748dcaa70 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -24,8 +24,6 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts 
b/arch/arm/dts/sun50i-h6-pine-h64.dts
index ceffc40810..a26314c084 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -42,16 +42,12 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins>;
        vmmc-supply = <&reg_cldo1>;
        vqmmc-supply = <&reg_bldo2>;
        non-removable;
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index cfa5fffcf6..5f01314703 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -19,28 +19,28 @@
                #size-cells = <0>;
 
                cpu0: cpu@0 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <0>;
                        enable-method = "psci";
                };
 
                cpu1: cpu@1 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <1>;
                        enable-method = "psci";
                };
 
                cpu2: cpu@2 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <2>;
                        enable-method = "psci";
                };
 
                cpu3: cpu@3 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <3>;
                        enable-method = "psci";
@@ -143,7 +143,7 @@
                                bias-pull-up;
                        };
 
-                       uart0_ph_pins: uart0-ph {
+                       uart0_ph_pins: uart0-ph-pins {
                                pins = "PH0", "PH1";
                                function = "uart0";
                        };
@@ -158,6 +158,8 @@
                        resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -186,6 +188,8 @@
                        resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -266,7 +270,7 @@
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
-                       r_i2c_pins: r-i2c {
+                       r_i2c_pins: r-i2c-pins {
                                pins = "PL0", "PL1";
                                function = "s_i2c";
                        };
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot