Hi,
On Fri, Mar 29, 2019 at 2:09 PM Heiko Stübner <he...@sntech.de> wrote:
> > +#ifdef CONFIG_DM_REGULATOR
>
> this should be
> #if CONFIG_IS_ENABLED(DM_REGULATOR)
Ok, just FYI that fragment was based on the one in tmio-common.c,
so maybe that should also be fixed(?).
>
> because otherwise an SPL-build using the mmc driver may fail with
>
> drivers/mmc/dw_mmc.c: In function ‘dwmci_set_ios’:
> drivers/mmc/dw_mmc.c:475:9: error: ‘struct mmc’ has no member named
> ‘vqmmc_supply’
> if (mmc->vqmmc_supply) {
> ^~
> drivers/mmc/dw_mmc.c:477:27: error: ‘struct mmc’ has no member named
> ‘vqmmc_supply’
> regulator_set_value(mmc->vqmmc_supply, 1800000);
> ^~
> drivers/mmc/dw_mmc.c:479:27: error: ‘struct mmc’ has no member named
> ‘vqmmc_supply’
> regulator_set_value(mmc->vqmmc_supply, 3300000);
> ^~
> drivers/mmc/dw_mmc.c:481:44: error: ‘struct mmc’ has no member named
> ‘vqmmc_supply’
> ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, true);
>
>
> > + if (mmc->vqmmc_supply) {
> > + if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
> > + regulator_set_value(mmc->vqmmc_supply, 1800000);
> > + else
> > + regulator_set_value(mmc->vqmmc_supply, 3300000);
> > +
> > + ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply,
> > true);
> > + if (ret)
> > + return ret;
> > + }
> > +#endif
> > +
> > return 0;
> > }
> >
--
Urja Rannikko
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
