Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file for all rockchip SoCs later.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---
arch/arm/mach-rockchip/rk3288-board-spl.c | 12 ++----------
arch/arm/mach-rockchip/rk3288-board-tpl.c | 16 ++--------------
arch/arm/mach-rockchip/rk3288/rk3288.c | 13 +++++++++++++
3 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c
b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 937a99db53..d8d215db8a 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -109,16 +109,7 @@ void board_init_f(ulong dummy)
struct udevice *dev;
int ret;
- /* Example code showing how to enable the debug UART on RK3288 */
-#include <asm/arch-rockchip/grf_rk3288.h>
- /* Enable early UART on the RK3288 */
-#define GRF_BASE 0xff770000
- struct rk3288_grf * const grf = (void *)GRF_BASE;
-
- rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
- GPIO7C6_MASK << GPIO7C6_SHIFT,
- GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
- GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
+#ifdef CONFIG_DEBUG_UART
/*
* Debug UART can be used from here if required:
*
@@ -129,6 +120,7 @@ void board_init_f(ulong dummy)
*/
debug_uart_init();
debug("\nspl:debug uart enabled in %s\n", __func__);
+#endif
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
diff --git a/arch/arm/mach-rockchip/rk3288-board-tpl.c
b/arch/arm/mach-rockchip/rk3288-board-tpl.c
index a430bb43ad..a9848067ba 100644
--- a/arch/arm/mach-rockchip/rk3288-board-tpl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-tpl.c
@@ -10,28 +10,16 @@
#include <spl.h>
#include <version.h>
#include <asm/io.h>
-#include <asm/arch-rockchip/bootrom.h>
#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/grf_rk3288.h>
-#include <asm/arch-rockchip/periph.h>
-#include <asm/arch-rockchip/pmu_rk3288.h>
#include <asm/arch-rockchip/sys_proto.h>
#include <asm/arch-rockchip/timer.h>
-#define GRF_BASE 0xff770000
void board_init_f(ulong dummy)
{
struct udevice *dev;
int ret;
- /* Example code showing how to enable the debug UART on RK3288 */
- /* Enable early UART on the RK3288 */
- struct rk3288_grf * const grf = (void *)GRF_BASE;
-
- rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
- GPIO7C6_MASK << GPIO7C6_SHIFT,
- GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
- GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
+#ifdef CONFIG_DEBUG_UART
/*
* Debug UART can be used from here if required:
*
@@ -41,7 +29,7 @@ void board_init_f(ulong dummy)
* printascii("string");
*/
debug_uart_init();
-
+#endif
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c
b/arch/arm/mach-rockchip/rk3288/rk3288.c
index 987fae544c..7941ca68a6 100644
--- a/arch/arm/mach-rockchip/rk3288/rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/rk3288.c
@@ -18,3 +18,16 @@ int arch_cpu_init(void)
return 0;
}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+ /* Enable early UART on the RK3288 */
+ struct rk3288_grf * const grf = (void *)GRF_BASE;
+
+ rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT |
+ GPIO7C6_MASK << GPIO7C6_SHIFT,
+ GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT |
+ GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT);
+}
+#endif
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
