> -----Original Message----- > From: Pankaj Bansal > Sent: Monday, March 25, 2019 5:28 PM > To: Meenakshi Aggarwal <meenakshi.aggar...@nxp.com>; Priyanka Jain > <priyanka.j...@nxp.com>; Prabhakar Kushwaha > <prabhakar.kushw...@nxp.com> > Cc: u-boot@lists.denx.de; Pankaj Bansal <pankaj.ban...@nxp.com> > Subject: [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading during SD > boot > > during SD boot, following error comes: > MMC read: dev # 0, block # 20480, count 2048 ... 2048 blocks read: OK > > MMC read: dev # 0, block # 28672, count 2048 ... 2048 blocks read: OK > fsl-mc: ERR: Bad firmware image (bad FIT header) > Hit any key to stop autoboot: 0 > > it's occurring because mc 10.14.3 file size is 1064880, which means 0x820 SD > blocks which is more than 0x800 blocks (1MB). This results in DPC loading > address 0x80100000 overlapping with MC loading address 0x80000000. > > so, update the MC/dpl/dpc addresses as per their addresses in SD card. > Assuming that SD card block size is 512 bytes and 0x0 block in SD card would > get loaded at 0x80000000 (DDR base address), this gives following addresses > for various binaries: > > Binary | SD block | DDR offset > ------------------------------ > MC | 0x5000 | 0x80a00000 > DPL | 0x6800 | 0x80d00000 > DPC | 0x7000 | 0x80e00000 >
This info should be part of README present in board folder. No need to add in commit message. --pk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
