On 3/12/19 9:31 AM, Ley Foon Tan wrote:
> Setup bi_dram struct based on returned from setup_memory_banks().
>
> Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
> ---
> arch/arm/mach-socfpga/board.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
> index 7c8c05cc31..a0e9917e47 100644
> --- a/arch/arm/mach-socfpga/board.c
> +++ b/arch/arm/mach-socfpga/board.c
> @@ -12,6 +12,7 @@
> #include <asm/arch/clock_manager.h>
> #include <asm/arch/misc.h>
> #include <asm/io.h>
> +#include <asm/arch/sdram.h>
>
> #include <usb.h>
> #include <usb/dwc2_udc.h>
> @@ -48,8 +49,21 @@ int board_init(void)
>
> int dram_init_banksize(void)
> {
> - fdtdec_setup_memory_banksize();
> +#if defined(CONFIG_TARGET_SOCFPGA_STRATIX10) && defined(CONFIG_ALTERA_SDRAM)
> + phys_addr_t bank_start[CONFIG_NR_DRAM_BANKS];
> + phys_size_t bank_size[CONFIG_NR_DRAM_BANKS];
> + int bank;
> +
> + gd->ram_size = sdram_calculate_size();
> + setup_memory_banks(bank_start, bank_size);
>
> + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
> + gd->bd->bi_dram[bank].start = bank_start[bank];
> + gd->bd->bi_dram[bank].size = bank_size[bank];
> + }
> +#else
> + fdtdec_setup_memory_banksize();
> +#endif
> return 0;
> }
Split this out into separate file if this really needs to be different,
but can't you somehow use fdtdec_setup_memory_size() on S10 and then
apply sanity checking instead ?
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
