Hi Soeren On Fri, 2019-03-01 at 13:20 +0100, Soeren Moch wrote: > > On 25.02.19 11:39, Soeren Moch wrote: > > On 08.02.19 18:12, Marcel Ziswiler wrote: > > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > > > Migrate MMC and SATA to using driver model. > > > > > > While at it also enable SCSI driver model. > > > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > [also reply to v2 of this series to avoid that this gets lost in > > patchwork] > > > > Hi Marcel, > > > > Thank you for providing this solution to keep SATA working on i.MX6 > > under DM_SCSI. > > I also want to use this on a tbs2910 board, there was a long list > > of > > other boards needing this functionality [1]. > > > > Can you implement the UCLASS at a more general place, e.g. > > drivers/ata/dwc_ahsata.c directly, instead of your board file? So > > this > > functionality could easily be enabled for other boards. > > > > Thank you, > > Soeren > > > > [1] > > https://lists.denx.de/pipermail/u-boot/2018-November/349368.html > > > > > Since there was no feedback on this so far, I sent a proposal here: > https://lists.denx.de/pipermail/u-boot/2019-March/360521.html
Yeah, sorry. I got trapped at the Embedded World in Nürnberg and your message disappeared in the spew of emails I just now managed to get on top off again. I will give your proposal a try and will re-work my patch set accordingly. Thanks for cleaning up this mess! > Regards, > Soeren Cheers Marcel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
