On Sat, Feb 16, 2019 at 04:22:44PM -0500, Tom Rini wrote: > On Sat, Feb 16, 2019 at 03:08:02PM -0600, Derald D. Woods wrote: > > On Sat, Feb 16, 2019 at 03:49:01PM -0500, Tom Rini wrote: > > > On Sat, Feb 16, 2019 at 01:31:24PM -0600, Adam Ford wrote: > > > > > > > With the generic omap3-u-boot.dtsi file available, this patch > > > > increased the memory of the various incarnations of the omap3_logic > > > > board, and points their respective u-boot.dtsi files to the newly > > > > created generic one, and removes the PLATDATA from the board file. > > > > > > > > These are all done at once because the're all utilizing the same > > > > omap3logic.c board file. > > > > > > > > Signed-off-by: Adam Ford <aford...@gmail.com> > > > > > > Ah-haha! Thank you! I also needed to delete the platform data and then > > > beagleboard is also booting. > > > > > > > Can we get a quick summary of the conversion steps? My omap3-evm did not > > get a serial console when applying patch[1] and using example > > modifications from patch[2]. > > I'm cleaning up Beagle now but: > - Switch to using the new omap3-u-boot.dtsi > - Remove all platdata from the board files > - These are a must: > CONFIG_SYS_MALLOC_F_LEN=0x4000 > CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 > CONFIG_SPL_SYS_MALLOC_SIMPLE=y > CONFIG_SPL_SEPARATE_BSS=y > CONFIG_SPL_OF_CONTROL=y > CONFIG_SPL_DM_SEQ_ALIAS=y > CONFIG_SPL_OF_TRANSLATE=y >
Success. I followed the example of your recent beagleboard patch and can now boot as described. I will push a patch after a clean build of the default config for the OMAP3-EVM. Thanks. Derald > And we tend to drop falcon mode due to size, but could find other things > instead. > > -- > Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
