On Sat, Feb 16, 2019 at 03:30:08PM -0600, Adam Ford wrote: > On Sat, Feb 16, 2019 at 3:22 PM Tom Rini <tr...@konsulko.com> wrote: > > > > On Sat, Feb 16, 2019 at 03:08:02PM -0600, Derald D. Woods wrote: > > > On Sat, Feb 16, 2019 at 03:49:01PM -0500, Tom Rini wrote: > > > > On Sat, Feb 16, 2019 at 01:31:24PM -0600, Adam Ford wrote: > > > > > > > > > With the generic omap3-u-boot.dtsi file available, this patch > > > > > increased the memory of the various incarnations of the omap3_logic > > > > > board, and points their respective u-boot.dtsi files to the newly > > > > > created generic one, and removes the PLATDATA from the board file. > > > > > > > > > > These are all done at once because the're all utilizing the same > > > > > omap3logic.c board file. > > > > > > > > > > Signed-off-by: Adam Ford <aford...@gmail.com> > > > > > > > > Ah-haha! Thank you! I also needed to delete the platform data and then > > > > beagleboard is also booting. > > > > > > > > > > Can we get a quick summary of the conversion steps? My omap3-evm did not > > > get a serial console when applying patch[1] and using example > > > modifications from patch[2]. > > > > I'm cleaning up Beagle now but: > > - Switch to using the new omap3-u-boot.dtsi > > - Remove all platdata from the board files > > - These are a must: > > CONFIG_SYS_MALLOC_F_LEN=0x4000 > > CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 > > 0x400 or 0x4000? I think mine is 0x4000
It's 0x400, which is the default. It may need to grow again as we set it to 0x1000 but only on AM33XX. Maybe that's just a bit large, would have to check. > > CONFIG_SPL_SYS_MALLOC_SIMPLE=y > > CONFIG_SPL_SEPARATE_BSS=y > > CONFIG_SPL_OF_CONTROL=y > > CONFIG_SPL_DM_SEQ_ALIAS=y > > CONFIG_SPL_OF_TRANSLATE=y > > > > And we tend to drop falcon mode due to size, but could find other things > > instead. > > I was able to drop EXT support in SPL. At least the Logic PD > documentation states formatting the SD cards as FAT, so the stuff we > publish doesn't need EXT in SPL. Falcon Mode was important for us to > keep, but I noticed it takes more space. > Luckily, I was able to retain it. I might be able to reduce the amount of removed parts on Beagle, but we don't have Falcon mode in use widely there I think. And I need more space as I'm tempted to see if I can finally do things like support NAND env on Beagleboard and FAT env for xM and so forth. -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
