Hi Joris, On Sat, Feb 16, 2019 at 12:38 PM Joris Offouga <offougajo...@gmail.com> wrote:
> By doing this the SPL still does not find the U-Boot binary always this > same log: > > U-Boot SPL 2019.04-rc1-00142-g7fe4b77-dirty (Feb 16 2019 - 13:58:30 > +0100) > Trying to boot from MMC1 Yes, just tried it and I saw the same here. I started from scratch and used top of tree U-Boot. When I load it via USB I see a hang: CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: i.MX7D PICOSOM I2C: ready DRAM: 512 MiB ... So this is a regression and I will try to bisect it. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
