On Thu, Feb 14, 2019 at 10:02 AM Fabio Estevam <feste...@gmail.com> wrote:
>
> Import the device tree files from kernel 5.0-rc6 in preparation
> for driver model conversion.
>
> Signed-off-by: Fabio Estevam <feste...@gmail.com>
Acked-by: Otavio Salvador <ota...@ossystems.com.br>
> ---
> arch/arm/dts/imx6ul-pico-hobbit.dts | 100 ++++++
> arch/arm/dts/imx6ul-pico-pi.dts | 97 ++++++
> arch/arm/dts/imx6ul-pico.dtsi | 461 ++++++++++++++++++++++++++++
> 3 files changed, 658 insertions(+)
> create mode 100644 arch/arm/dts/imx6ul-pico-hobbit.dts
> create mode 100644 arch/arm/dts/imx6ul-pico-pi.dts
> create mode 100644 arch/arm/dts/imx6ul-pico.dtsi
>
> diff --git a/arch/arm/dts/imx6ul-pico-hobbit.dts
> b/arch/arm/dts/imx6ul-pico-hobbit.dts
> new file mode 100644
> index 0000000000..39eeeddac3
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-pico-hobbit.dts
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2015 Technexion Ltd.
> +//
> +// Author: Wig Cheng <wig.ch...@technexion.com>
> +// Richard Hu <richard...@technexion.com>
> +// Tapani Utriainen <tap...@technexion.com>
> +/dts-v1/;
> +
> +#include "imx6ul-pico.dtsi"
> +/ {
> + model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
> + compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> + led {
> + label = "gpio-led";
> + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + sound {
> + compatible = "fsl,imx-audio-sgtl5000";
> + model = "imx6ul-sgtl5000";
> + audio-cpu = <&sai1>;
> + audio-codec = <&sgtl5000>;
> + audio-routing =
> + "LINE_IN", "Line In Jack",
> + "MIC_IN", "Mic Jack",
> + "Mic Jack", "Mic Bias",
> + "Headphone Jack", "HP_OUT";
> + };
> +
> + sys_mclk: clock-sys-mclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24576000>;
> + };
> +};
> +
> +&i2c2 {
> + clock_frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + sgtl5000: codec@a {
> + reg = <0x0a>;
> + compatible = "fsl,sgtl5000";
> + clocks = <&sys_mclk>;
> + VDDA-supply = <®_2p5v>;
> + VDDIO-supply = <®_3p3v>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + polytouch: touchscreen@38 {
> + compatible = "edt,edt-ft5x06";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + };
> +
> + adc081c: adc@50 {
> + compatible = "ti,adc081c";
> + reg = <0x50>;
> + vref-supply = <®_3p3v>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0
> + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0
> + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0
> + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0
> + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0
> + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledsgrp {
> + fsl,pins = <
> + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6ul-pico-pi.dts b/arch/arm/dts/imx6ul-pico-pi.dts
> new file mode 100644
> index 0000000000..de07357b27
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-pico-pi.dts
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2015 Technexion Ltd.
> +//
> +// Author: Wig Cheng <wig.ch...@technexion.com>
> +// Richard Hu <richard...@technexion.com>
> +// Tapani Utriainen <tap...@technexion.com>
> +/dts-v1/;
> +
> +#include "imx6ul-pico.dtsi"
> +/ {
> + model = "TechNexion PICO-IMX6UL and PI baseboard";
> + compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> + led {
> + label = "gpio-led";
> + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + sound {
> + compatible = "fsl,imx-audio-sgtl5000";
> + model = "imx6ul-sgtl5000";
> + audio-cpu = <&sai1>;
> + audio-codec = <&sgtl5000>;
> + audio-routing =
> + "LINE_IN", "Line In Jack",
> + "MIC_IN", "Mic Jack",
> + "Mic Jack", "Mic Bias",
> + "Headphone Jack", "HP_OUT";
> + };
> +
> + sys_mclk: clock-sys-mclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24576000>;
> + };
> +};
> +
> +&i2c2 {
> + clock_frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + sgtl5000: codec@a {
> + reg = <0x0a>;
> + compatible = "fsl,sgtl5000";
> + clocks = <&sys_mclk>;
> + VDDA-supply = <®_2p5v>;
> + VDDIO-supply = <®_3p3v>;
> + };
> +};
> +
> +&i2c3 {
> + clock_frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + polytouch: touchscreen@38 {
> + compatible = "edt,edt-ft5x06";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0
> + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0
> + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0
> + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0
> + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x10b0
> + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x10b0
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledsgrp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6ul-pico.dtsi b/arch/arm/dts/imx6ul-pico.dtsi
> new file mode 100644
> index 0000000000..de9f83189b
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-pico.dtsi
> @@ -0,0 +1,461 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Copyright 2015 Technexion Ltd.
> +//
> +// Author: Wig Cheng <wig.ch...@technexion.com>
> +// Richard Hu <richard...@technexion.com>
> +// Tapani Utriainen <tap...@technexion.com>
> +/dts-v1/;
> +
> +#include "imx6ul.dtsi"
> +
> +/ {
> + /* Will be filled by the bootloader */
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0>;
> + };
> +
> + chosen {
> + stdout-path = &uart6;
> + };
> +
> + backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm3 0 5000000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <6>;
> + status = "okay";
> + };
> +
> + reg_2p5v: regulator-2p5v {
> + compatible = "regulator-fixed";
> + regulator-name = "2P5V";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <2500000>;
> + };
> +
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + reg_sd1_vmmc: regulator-sd1-vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "VSD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usb_otg_vbus: regulator-usb-otg-vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb_otg1>;
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 6 0>;
> + };
> +
> + reg_brcm: regulator-brcm {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_brcm_reg>;
> + regulator-name = "brcm_reg";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + startup-delay-us = <200000>;
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + status = "okay";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> + status = "okay";
> +};
> +
> +&clks {
> + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
> + assigned-clock-rates = <786432000>;
> +};
> +
> +&fec2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet2>;
> + phy-mode = "rmii";
> + phy-handle = <ðphy1>;
> + status = "okay";
> + phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
> + phy-reset-duration = <1>;
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + max-speed = <100>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + pmic: pfuze3000@8 {
> + compatible = "fsl,pfuze3000";
> + reg = <0x08>;
> +
> + regulators {
> + /* VDD_ARM_SOC_IN*/
> + sw1b_reg: sw1b {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1475000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + /* DRAM */
> + sw3a_reg: sw3 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1650000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* DRAM */
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
> + display = <&display0>;
> + status = "okay";
> +
> + display0: display0 {
> + bits-per-pixel = <32>;
> + bus-width = <24>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> +
> + timing0: timing0 {
> + clock-frequency = <33200000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <210>;
> + hback-porch = <46>;
> + hsync-len = <1>;
> + vback-porch = <22>;
> + vfront-porch = <23>;
> + vsync-len = <1>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&pwm3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm3>;
> + status = "okay";
> +};
> +
> +&pwm7 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm7>;
> + status = "okay";
> +};
> +
> +&pwm8 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm8>;
> + status = "okay";
> +};
> +
> +&sai1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai1>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart6>;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb_otg1_id>;
> + dr_mode = "otg";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + dr_mode = "host";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + bus-width = <8>;
> + no-1-8-v;
> + non-removable;
> + keep-power-in-suspend;
> + status = "okay";
> +};
> +
> +&usdhc2 { /* Wifi SDIO */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + no-1-8-v;
> + non-removable;
> + keep-power-in-suspend;
> + wakeup-source;
> + vmmc-supply = <®_brcm>;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> +};
> +
> +&iomuxc {
> + pinctrl_brcm_reg: brcmreggrp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /*
> WL_REG_ON */
> + MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x10b0 /*
> WL_HOST_WAKE */
> + >;
> + };
> +
> + pinctrl_enet2: enet2grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0
> + MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x1b0b0
> + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
> + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
> + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
> + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
> + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
> + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
> + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
> + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x800
> + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x79
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
> + MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
> + MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0
> + MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
> + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x4001b8b0
> + MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_lcdif_dat: lcdifdatgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
> + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
> + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
> + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
> + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
> + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
> + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
> + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
> + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
> + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
> + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
> + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
> + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
> + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
> + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
> + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
> + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
> + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
> + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
> + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
> + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
> + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
> + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
> + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
> + >;
> + };
> +
> + pinctrl_lcdif_ctrl: lcdifctrlgrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
> + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
> + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
> + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
> + /* LCD reset */
> + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
> + >;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_ALE__PWM3_OUT 0x110b0
> + >;
> + };
> +
> + pinctrl_pwm7: pwm7grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x110b0
> + >;
> + };
> +
> + pinctrl_pwm8: pwm8grp {
> + fsl,pins = <
> + MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
> + >;
> + };
> +
> + pinctrl_sai1: sai1grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b0
> + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b0
> + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0
> + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b0
> + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b0
> + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b0
> + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b0
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x1b0b1
> + MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x1b0b1
> + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
> + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart6: uart6grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
> + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usb_otg1: usbotg1grp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x10b0
> + >;
> + };
> +
> + pinctrl_usb_otg1_id: usbotg1idgrp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
> + MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
> + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
> + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
> + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
> + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
> + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059
> + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
> + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
> + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
> + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
> + >;
> + };
> +};
> --
> 2.17.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> https://lists.denx.de/listinfo/u-boot
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
