On 13/02/19 00:05, Tom Rini wrote: > On Tue, Feb 12, 2019 at 03:44:05PM -0600, Adam Ford wrote: >> On Tue, Feb 12, 2019 at 3:41 PM Scott Wood <o...@buserror.net> wrote: >>> >>> On Sun, 2019-02-10 at 07:48 -0600, Adam Ford wrote: >>>> On Sun, Feb 10, 2019 at 7:30 AM Adam Ford <aford...@gmail.com> wrote: >>>>> >>>>> On Mon, Feb 4, 2019 at 12:17 PM Tim Harvey <thar...@gateworks.com> wrote: >>>>>> >>>>>> On Wed, Jan 2, 2019 at 6:37 PM Adam Ford <aford...@gmail.com> wrote: >>>>>>> >>>>>>> The LogicPD board uses a Micron Flash with ECC. To boot this from >>>>>>> SPL, the ECC needs to be correctly configured or the BCH engine >>>>>>> times out. >>>>>>> >>>>>>> Signed-off-by: Adam Ford <aford...@gmail.com> >>>>>>> >>>>>>> diff --git a/drivers/mtd/nand/raw/mxs_nand.c >>>>>>> b/drivers/mtd/nand/raw/mxs_nand.c >>>>>>> index e3341812a2..2d84bfffe2 100644 >>>>>>> --- a/drivers/mtd/nand/raw/mxs_nand.c >>>>>>> +++ b/drivers/mtd/nand/raw/mxs_nand.c >>>>>>> @@ -1163,6 +1163,12 @@ int mxs_nand_init_spl(struct nand_chip *nand) >>>>>>> >>>>>>> nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE; >>>>>>> nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE; >>>>>>> + >>>>>>> + if (is_mx6sx() || is_mx7()) >>>>>>> + nand_info->max_ecc_strength_supported = 62; >>>>>>> + else >>>>>>> + nand_info->max_ecc_strength_supported = 40; >>>>>>> + >>>>>>> err = mxs_nand_alloc_buffers(nand_info); >>>>>>> if (err) >>>>>>> return err; >>>>>>> diff --git a/drivers/mtd/nand/raw/mxs_nand_spl.c >>>>>>> b/drivers/mtd/nand/raw/mxs_nand_spl.c >>>>>>> index c628f3adec..ba85baac60 100644 >>>>>>> --- a/drivers/mtd/nand/raw/mxs_nand_spl.c >>>>>>> +++ b/drivers/mtd/nand/raw/mxs_nand_spl.c >>>>>>> @@ -201,6 +201,7 @@ static int mxs_nand_init(void) >>>>>>> /* setup flash layout (does not scan as we override that) */ >>>>>>> mtd->size = nand_chip.chipsize; >>>>>>> nand_chip.scan_bbt(mtd); >>>>>>> + mxs_nand_setup_ecc(mtd); >>>>>>> >>>>>>> return 0; >>>>>>> } >>>>>>> -- >>>>>>> 2.17.1 >>>>>>> >>>>>> >>>>>> Thanks Adam, >>>> >>>> Scott / Stefano, >>>> >>>> I had to use Scott's other -email. >>>> >>>> >>>> Any chance this can get reviewed and/or applied for the next release? >>>> We've got a few people who have their respective tested-by comments. >>> >>> I haven't been involved in U-Boot for a while now. >> >> Tom / Stefano, >> >> Patchwork is showing this is being delegated to Scott, but he's saying >> he isn't the right person. Is there someone else who can review >> and/or apply a few of these patches designated to Scott? Both of the >> patches I care about deligated to him are imx6 related > > I've assigned the mxs related patches to Stefano, thanks! >
Ok, thanks - I take care of this. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
