On Wed, Jan 2, 2019 at 6:37 PM Adam Ford <aford...@gmail.com> wrote: > > The LogicPD board uses a Micron Flash with ECC. To boot this from > SPL, the ECC needs to be correctly configured or the BCH engine > times out. > > Signed-off-by: Adam Ford <aford...@gmail.com> > > diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c > index e3341812a2..2d84bfffe2 100644 > --- a/drivers/mtd/nand/raw/mxs_nand.c > +++ b/drivers/mtd/nand/raw/mxs_nand.c > @@ -1163,6 +1163,12 @@ int mxs_nand_init_spl(struct nand_chip *nand) > > nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE; > nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE; > + > + if (is_mx6sx() || is_mx7()) > + nand_info->max_ecc_strength_supported = 62; > + else > + nand_info->max_ecc_strength_supported = 40; > + > err = mxs_nand_alloc_buffers(nand_info); > if (err) > return err; > diff --git a/drivers/mtd/nand/raw/mxs_nand_spl.c > b/drivers/mtd/nand/raw/mxs_nand_spl.c > index c628f3adec..ba85baac60 100644 > --- a/drivers/mtd/nand/raw/mxs_nand_spl.c > +++ b/drivers/mtd/nand/raw/mxs_nand_spl.c > @@ -201,6 +201,7 @@ static int mxs_nand_init(void) > /* setup flash layout (does not scan as we override that) */ > mtd->size = nand_chip.chipsize; > nand_chip.scan_bbt(mtd); > + mxs_nand_setup_ecc(mtd); > > return 0; > } > -- > 2.17.1 >
Thanks Adam, This resolves failed booting on Gateworks Ventana IMX6 with NAND SPL for MT29F2G08AB 2Gbit (oob=64) Acked-by: Tim Harvey <thar...@gateworks.com> Tested-by: Tim Harvey <thar...@gateworks.com> for GW5100 with MT29F2G08AB 2Gbit (oob=64) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
