Hi Simon, thank you for your review.
> > diff --git a/doc/README.splashprepare b/doc/README.splashprepare > > index f1418de..c7f7493 100644 > > --- a/doc/README.splashprepare > > +++ b/doc/README.splashprepare > > @@ -26,6 +26,6 @@ screen data is loaded as a file. The name of the splash > > screen file can be > > controlled with the environment variable "splashfile". > > > > To enable loading the splash image from a FIT image, CONFIG_FIT must be > > -enabled. Struct splash_location field 'name' should match the splash image > > -name within the FIT and the FIT should start at the 'offset' field address > > in > > -the specified storage. > > +enabled. The FIT image has to start at the 'offset' field address in the > > +selected splash location. The name of splash image within the FIT shall be > > +specified by the environment variable "splashfile". > > Can you also mention the default name? Good proposal, we will do that. I will wait if there is more feedback and then send an updated patch set. Greetings, Mark Building Technologies, Panel Software Fire (BT-FIR/ENG1) Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118 Aufsichtsratsvorsitzender: Christian Fischer; Geschäftsführung: Tanja Rückert, Andreas Bartz, Thomas Quante, Bernhard Schuster _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
