Add init_func_vid() which calls adjust_vdd()
This ensures adjust_vdd() is called via
init_sequence_f[]
Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com>
---
board/freescale/lx2160a/lx2160a.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/board/freescale/lx2160a/lx2160a.c
b/board/freescale/lx2160a/lx2160a.c
index a62222e..223ec5a 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2018 NXP
+ * Copyright 2018-2019 NXP
*/
#include <common.h>
@@ -100,6 +100,13 @@ int i2c_multiplexer_select_vid_channel(u8 channel)
return select_i2c_ch_pca9547(channel);
}
+int init_func_vid(void)
+{
+ if (adjust_vdd(0) < 0)
+ printf("core voltage not adjusted\n");
+
+ return 0;
+}
#endif
int checkboard(void)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
