Signed-off-by: Graeme Russ <graeme.r...@gmail.com>
---
board/eNET/eNET.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
board/eNET/hardware.h | 1 +
include/configs/eNET.h | 10 +---------
3 files changed, 48 insertions(+), 9 deletions(-)
diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
index ad71f7e..56e1a22 100644
--- a/board/eNET/eNET.c
+++ b/board/eNET/eNET.c
@@ -45,6 +45,9 @@ DECLARE_GLOBAL_DATA_PTR;
unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
+static void enet_timer_isr(void);
+static void enet_toggle_run_led(void);
+
void init_sc520_enet (void)
{
/* Set CPU Speed to 100MHz */
@@ -160,6 +163,10 @@ int last_stage_init(void)
major = minor = 0;
+ outb(0x00, LED_LATCH_ADDRESS);
+
+ register_timer_isr (enet_timer_isr);
+
printf("Serck Controls eNET\n");
return 0;
@@ -218,3 +225,42 @@ void setup_pcat_compatibility()
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
}
+
+void enet_timer_isr(void)
+{
+ static long enet_ticks = 0;
+
+ enet_ticks++;
+
+ /* Toggle Watchdog every 100ms */
+ if ((enet_ticks % 100) == 0)
+ hw_watchdog_reset();
+
+ /* Toggle Run LED every 500ms */
+ if ((enet_ticks % 500) == 0)
+ enet_toggle_run_led();
+}
+
+void hw_watchdog_reset(void)
+{
+ /* Watchdog Reset must be atomic */
+ long flag = disable_interrupts();
+
+ if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
+ sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
+ else
+ sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
+
+ if (flag)
+ enable_interrupts();
+}
+
+void enet_toggle_run_led(void)
+{
+ unsigned char leds_state= inb(LED_LATCH_ADDRESS);
+ if (leds_state & LED_RUN_BITMASK)
+ outb(leds_state &~ LED_RUN_BITMASK, LED_LATCH_ADDRESS);
+ else
+ outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
+}
+
diff --git a/board/eNET/hardware.h b/board/eNET/hardware.h
index 42474a6..dec2cd8 100644
--- a/board/eNET/hardware.h
+++ b/board/eNET/hardware.h
@@ -31,5 +31,6 @@
#define LED_RX_BITMASK 0x08
#define LED_TX_BITMASK 0x10
#define LED_ERR_BITMASK 0x20
+#define WATCHDOG_PIO_BIT 0x8000
#endif /* HARDWARE_H_ */
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 6189794..361fe61 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -53,7 +53,7 @@
* bottom (processor) board MUST be removed!
*/
#undef CONFIG_WATCHDOG
-#undef CONFIG_HW_WATCHDOG
+#define CONFIG_HW_WATCHDOG
/*-----------------------------------------------------------------------
* Serial Configuration
@@ -234,14 +234,6 @@
#define CONFIG_RTL8139
/*-----------------------------------------------------------------------
- * Hardware watchdog configuration
- */
-#define CONFIG_SYS_WATCHDOG_PIO_BIT 0x8000
-#define CONFIG_SYS_WATCHDIG_PIO_DATA SC520_PIODATA15_0
-#define CONFIG_SYS_WATCHDIG_PIO_CLR SC520_PIOCLR15_0
-#define CONFIG_SYS_WATCHDIG_PIO_SET SC520_PIOSET15_0
-
-/*-----------------------------------------------------------------------
* FPGA configuration
*/
#define CONFIG_SYS_FPGA_PROGRAM_PIO_BIT 0x2000
--
1.7.1.rc1.12.ga601
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
