When power cycle the Jaguar2 boards, it couldn't read the
phys, therefore it always deduce that the board type is
pcb111.
Add a small delay after setting the gpio pins, fix the
issue.
Signed-off-by: Horatiu Vultur <horatiu.vul...@microchip.com>
---
board/mscc/jr2/jr2.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/board/mscc/jr2/jr2.c b/board/mscc/jr2/jr2.c
index 226181f..58a4a04 100644
--- a/board/mscc/jr2/jr2.c
+++ b/board/mscc/jr2/jr2.c
@@ -80,6 +80,9 @@ static void do_board_detect(void)
for (i = 56; i < 60; i++)
vcoreiii_gpio_set_alternate(i, 1);
+ /* small delay for settling the pins */
+ mdelay(30);
+
if (mscc_phy_rd(0, 0x10, 0x3, &pval) == 0 &&
((pval >> 4) & 0x3F) == 0x3c) {
gd->board_type = BOARD_TYPE_PCB112; /* Serval2-NID */
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
