Dear Matthias Weisser, In message <1271932257-14618-3-git-send-email-weiss...@arcor.de> you wrote: > This patch adds support for the display controller in > the MB86R0x SoCs. > > Signed-off-by: Matthias Weisser <weiss...@arcor.de> ... > + pGD->memSize = VIDEO_MEM_SIZE; > + pGD->frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
Please pay attention to the global memory map requirements. PRAM might go first. > + writel(dcm1, dspBase[i] + GC_DCM1); > + writel(dcm2, dspBase[i] + GC_DCM2); > + writel(dcm3, dspBase[i] + GC_DCM3); > + > + writew(htp, dspBase[i] + GC_HTP); > + writew(hdp, dspBase[i] + GC_HDP); > + writew(hdb, dspBase[i] + GC_HDB); > + writew(hsp, dspBase[i] + GC_HSP); > + writeb(hsw, dspBase[i] + GC_HSW); > + > + writeb(vsw, dspBase[i] + GC_VSW); > + writew(vtr, dspBase[i] + GC_VTR); > + writew(vsp, dspBase[i] + GC_VSP); > + writew(vdp, dspBase[i] + GC_VDP); > + > + writel(l2m, dspBase[i] + GC_L2M); > + writel(l2em, dspBase[i] + GC_L2EM); > + writel(l2oa0, dspBase[i] + GC_L2OA0); > + writel(l2da0, dspBase[i] + GC_L2DA0); > + writel(l2oa1, dspBase[i] + GC_L2OA1); > + writel(l2da1, dspBase[i] + GC_L2DA1); > + writew(l2dx, dspBase[i] + GC_L2DX); > + writew(l2dy, dspBase[i] + GC_L2DY); > + writew(l2wx, dspBase[i] + GC_L2WX); > + writew(l2wy, dspBase[i] + GC_L2WY); > + writew(l2ww, dspBase[i] + GC_L2WW); > + writew(l2wh, dspBase[i] + GC_L2WH); > + > + writel(dcm1 | (1 << 18) | (1 << 31), dspBase[i] + GC_DCM1); Please use a C struct instead. > +/* > + * Set a RGB color in the LUT > + */ > +void video_set_lut(unsigned int index, unsigned char r, > + unsigned char g, unsigned char b) > +{ > + > +} Code seems to be missing? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de The more we disagree, the more chance there is that at least one of us is right. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot