On Sun, 20 Jan 2019 23:38:32 +0100 Joris Offouga <offougajo...@gmail.com> wrote:
> Hi all, > > Pinctrl, GPIO, I2C, MMC, ETH are converted. > > Convert PMIC is the same of warp7 but i have a some erros, si this > log : U-Boot SPL 2019.01-00197-ga524e5d-dirty (Jan 20 2019 - 21:09:49 > +0100) Trying to boot from USB SDP > SDP: initialize... > SDP: handle requests... > Downloading file of size 556397 to 0x877fffc0... done > Jumping to header at 0x877fffc0 > Header Tag is not an IMX image > > U-Boot 2019.01-00197-ga524e5d-dirty (Jan 20 2019 - 21:09:49 +0100) > > CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 43C > Reset cause: POR > Model: TechNexion PICO-IMX7D Board and PI baseboard > Board: i.MX7D PICOSOM > DRAM: 512 MiB > read error from device: 9df65458 register: 0x3! > PMIC: PFUZE3000 DEV_ID=0x0 REV_ID=0xfffffffb > read error from device: 9df65458 register: 0x69! > write error to device: 9df65458 register: 0x23! > write error to device: 9df65458 register: 0x31! > write error to device: 9df65458 register: 0x21! > write error to device: 9df65458 register: 0x2f! > read error from device: 9df65458 register: 0x2e! > write error to device: 9df65458 register: 0x2e! > MMC: FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0 > Loading Environment from MMC... OK > In: serial@30a70000 > Out: serial@30a70000 > Err: serial@30a70000 > Net: > Warning: ethernet@30be0000 using MAC address from ROM > eth0: ethernet@30be0000 > Hit any key to stop autoboot: 0 > > USB is convert but update u-boot with dfu log a error : > > => dfu 0 mmc 0 > Request would exceed designated area! > #Deferred dfu_flush() failed!=> Please check if malloc pool size (in Kconfig) is large enough to handle DFU requests. Otherwise, please #define DEBUG in ./drivers/dfu.c and dfu_mmc.c and share output. > > Thanks a advance for your help. > > Best Regards, > > Joris Offouga > > Joris Offouga (9): > Arm: dts: imx7d-pico: Import Linux pico-pi dts > Arm: imx7d-pico: Add DT file hooks > pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7 > arm: imx7d-pico-pi: Convert to DM MMC initialization > pico-pi-imx7d: defconfig: Switch to DM for I2C > pico-imx7d-pico: defconfig: Switch to DM for UART > pico-imx7d: Convert to DM PMIC > arm: pico-pi-imx7d: Convert to DM USB > pico-imx7d: Convert to DM Ethernet > > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/imx7d-pico-pi.dts | 102 ++++++ > arch/arm/dts/imx7d-pico.dtsi | 588 > +++++++++++++++++++++++++++++++ > board/technexion/pico-imx7d/pico-imx7d.c | 105 +----- > configs/pico-pi-imx7d_defconfig | 17 +- > include/configs/pico-imx7d.h | 11 - 6 files changed, 726 > insertions(+), 100 deletions(-) create mode 100644 > arch/arm/dts/imx7d-pico-pi.dts create mode 100644 > arch/arm/dts/imx7d-pico.dtsi > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpqqMHIU_FOx.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
