On Wed, 16 Jan 2019 14:03:32 +0000 Abel Vesa <abel.v...@nxp.com> wrote:
> Add necessary dts and dtsi files in order to enable DM in both > SPL and u-boot proper for mx6sabresd. Please state the exact SHA1 and branch for this porting. > > Signed-off-by: Abel Vesa <abel.v...@nxp.com> > --- > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/imx6q-sabresd.dts | 92 ++++ > arch/arm/dts/imx6qdl-sabresd.dtsi | 1065 > +++++++++++++++++++++++++++++++++++++ 3 files changed, 1159 > insertions(+), 1 deletion(-) create mode 100644 > arch/arm/dts/imx6q-sabresd.dts create mode 100644 > arch/arm/dts/imx6qdl-sabresd.dtsi > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index dad5436..1614a19 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -439,7 +439,8 @@ dtb-$(CONFIG_MX6QDL) += \ > imx6q-icore-mipi.dtb \ > imx6q-icore-rqs.dtb \ > imx6q-logicpd.dtb \ > - imx6q-sabreauto.dtb > + imx6q-sabreauto.dtb \ > + imx6q-sabresd.dtb > > dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb > > diff --git a/arch/arm/dts/imx6q-sabresd.dts > b/arch/arm/dts/imx6q-sabresd.dts new file mode 100644 > index 0000000..d9cdb20 > --- /dev/null > +++ b/arch/arm/dts/imx6q-sabresd.dts > @@ -0,0 +1,92 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2012=2015 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > + > +#include "imx6q.dtsi" > +#include "imx6qdl-sabresd.dtsi" > + > +/ { > + model = "Freescale i.MX6 Quad SABRE Smart Device Board"; > + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; > +}; > + > +/ { > + soc { > + u-boot,dm-spl; > + > + aips-bus@02000000 { > + u-boot,dm-spl; > + }; > + > + aips-bus@02100000 { > + u-boot,dm-spl; > + }; > + }; > +}; > + > +&gpio1 { > + u-boot,dm-spl; > +}; > + > +&gpio2 { > + u-boot,dm-spl; > +}; > + > +&gpio6 { > + u-boot,dm-spl; > +}; > + > +&gpio1 { > + u-boot,dm-spl; > +}; > + > +&iomuxc { > + u-boot,dm-spl; > +}; > + > +&battery { > + offset-charger = <1900>; > + offset-discharger = <1694>; > + offset-usb-charger = <1685>; > +}; > + > +&ldb { > + lvds-channel@0 { > + crtc = "ipu2-di0"; > + }; > + > + lvds-channel@1 { > + crtc = "ipu2-di1"; > + }; > +}; > + > +&mxcfb1 { > + status = "okay"; > +}; > + > +&mxcfb2 { > + status = "okay"; > +}; > + > +&mxcfb3 { > + status = "okay"; > +}; > + > +&mxcfb4 { > + status = "okay"; > +}; > + > +&sata { > + status = "okay"; > +}; > diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi > b/arch/arm/dts/imx6qdl-sabresd.dtsi new file mode 100644 > index 0000000..09b2591 > --- /dev/null > +++ b/arch/arm/dts/imx6qdl-sabresd.dtsi > @@ -0,0 +1,1065 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2012-2016 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > + > +/ { > + aliases { > + mxcfb0 = &mxcfb1; > + mxcfb1 = &mxcfb2; > + mxcfb2 = &mxcfb3; > + mxcfb3 = &mxcfb4; > + mmc1 = &usdhc3; > + }; > + > + battery: max8903@0 { > + compatible = "fsl,max8903-charger"; > + pinctrl-names = "default"; > + dok_input = <&gpio2 24 1>; > + uok_input = <&gpio1 27 1>; > + chg_input = <&gpio3 23 1>; > + flt_input = <&gpio5 2 1>; > + fsl,dcm_always_high; > + fsl,dc_valid; > + fsl,usb_valid; > + status = "okay"; > + }; > + > + hannstar_cabc { > + compatible = "hannstar,cabc"; > + lvds0 { > + gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; > + }; > + lvds1 { > + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + chosen { > + stdout-path = &uart1; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + charger-led { > + gpios = <&gpio1 2 0>; > + linux,default-trigger = > "max8903-charger-charging"; > + retain-state-suspended; > + }; > + }; > + > + memory: memory { > + reg = <0x10000000 0x40000000>; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg_usb_otg_vbus: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "usb_otg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 22 0>; > + enable-active-high; > + vin-supply = <&swbst_reg>; > + }; > + > + reg_usb_h1_vbus: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "usb_h1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio1 29 0>; > + enable-active-high; > + vin-supply = <&swbst_reg>; > + }; > + > + reg_audio: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "wm8962-supply"; > + gpio = <&gpio4 10 0>; > + enable-active-high; > + }; > + > + reg_pcie: regulator@3 { > + compatible = "regulator-fixed"; > + reg = <3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie_reg>; > + regulator-name = "MPCIE_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio3 19 0>; > + regulator-always-on; > + enable-active-high; > + }; > + > + reg_sensor: regulator@4 { > + compatible = "regulator-fixed"; > + reg = <4>; > + regulator-name = "sensor-supply"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 31 0>; > + startup-delay-us = <500>; > + enable-active-high; > + }; > + > + reg_hdmi: regulator@5 { > + compatible = "regulator-fixed"; > + reg = <5>; > + regulator-name = "hdmi-5v-supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + hdmi-5v-supply = <&swbst_reg>; > + }; > + > + reg_mipi_dsi_pwr_on: mipi_dsi_pwr_on { > + compatible = "regulator-fixed"; > + regulator-name = "mipi_dsi_pwr_on"; > + gpio = <&gpio6 14 0>; > + enable-active-high; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + > + power { > + label = "Power Button"; > + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; > + gpio-key,wakeup; > + linux,code = <KEY_POWER>; > + }; > + > + volume-up { > + label = "Volume Up"; > + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; > + gpio-key,wakeup; > + linux,code = <KEY_VOLUMEUP>; > + }; > + > + volume-down { > + label = "Volume Down"; > + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > + gpio-key,wakeup; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > + }; > + > + sound { > + compatible = "fsl,imx6q-sabresd-wm8962", > + "fsl,imx-audio-wm8962"; > + model = "wm8962-audio"; > + cpu-dai = <&ssi2>; > + audio-codec = <&codec>; > + asrc-controller = <&asrc>; > + audio-routing = > + "Headphone Jack", "HPOUTL", > + "Headphone Jack", "HPOUTR", > + "Ext Spk", "SPKOUTL", > + "Ext Spk", "SPKOUTR", > + "AMIC", "MICBIAS", > + "IN3R", "AMIC", > + "DMIC", "MICBIAS", > + "DMICDAT", "DMIC", > + "CPU-Playback", "ASRC-Playback", > + "Playback", "CPU-Playback", > + "ASRC-Capture", "CPU-Capture", > + "CPU-Capture", "Capture"; > + mux-int-port = <2>; > + mux-ext-port = <3>; > + codec-master; > + hp-det-gpios = <&gpio7 8 1>; > + mic-det-gpios = <&gpio1 9 1>; > + }; > + > + mxcfb1: fb@0 { > + compatible = "fsl,mxc_sdc_fb"; > + disp_dev = "ldb"; > + interface_pix_fmt = "RGB666"; > + default_bpp = <16>; > + int_clk = <0>; > + late_init = <0>; > + status = "disabled"; > + }; > + > + mxcfb2: fb@1 { > + compatible = "fsl,mxc_sdc_fb"; > + disp_dev = "hdmi"; > + interface_pix_fmt = "RGB24"; > + mode_str ="1920x1080M@60"; > + default_bpp = <24>; > + int_clk = <0>; > + late_init = <0>; > + status = "disabled"; > + }; > + > + mxcfb3: fb@2 { > + compatible = "fsl,mxc_sdc_fb"; > + disp_dev = "lcd"; > + interface_pix_fmt = "RGB565"; > + mode_str ="CLAA-WVGA"; > + default_bpp = <16>; > + int_clk = <0>; > + late_init = <0>; > + status = "disabled"; > + }; > + > + mxcfb4: fb@3 { > + compatible = "fsl,mxc_sdc_fb"; > + disp_dev = "ldb"; > + interface_pix_fmt = "RGB666"; > + default_bpp = <16>; > + int_clk = <0>; > + late_init = <0>; > + status = "disabled"; > + }; > + > + lcd@0 { > + compatible = "fsl,lcd"; > + ipu_id = <0>; > + disp_id = <0>; > + default_ifmt = "RGB565"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1>; > + status = "okay"; > + }; > + > + backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm1 0 5000000>; > + brightness-levels = <0 4 8 16 32 64 128 255>; > + default-brightness-level = <7>; > + status = "okay"; > + }; > + > + v4l2_cap_0 { > + compatible = "fsl,imx6q-v4l2-capture"; > + ipu_id = <0>; > + csi_id = <0>; > + mclk_source = <0>; > + status = "okay"; > + }; > + > + v4l2_cap_1 { > + compatible = "fsl,imx6q-v4l2-capture"; > + ipu_id = <0>; > + csi_id = <1>; > + mclk_source = <0>; > + status = "okay"; > + }; > + > + v4l2_out { > + compatible = "fsl,mxc_v4l2_output"; > + status = "okay"; > + }; > + > + mipi_dsi_reset: mipi-dsi-reset { > + compatible = "gpio-reset"; > + reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; > + reset-delay-us = <50>; > + #reset-cells = <0>; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + status = "okay"; > +}; > + > +&cpu0 { > + arm-supply = <&sw1a_reg>; > + soc-supply = <&sw1c_reg>; > +}; > + > +&clks { > + fsl,ldb-di0-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; > + fsl,ldb-di1-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; > +}; > + > +&ecspi1 { > + fsl,spi-num-chipselects = <1>; > + cs-gpios = <&gpio4 9 0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi1>; > + status = "okay"; > + > + flash: m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "st,m25p32"; > + spi-max-frequency = <20000000>; > + reg = <0>; > + }; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii"; > + phy-reset-gpios = <&gpio1 25 0>; > + fsl,magic-packet; > + status = "okay"; > +}; > + > +&gpc { > + fsl,ldo-bypass = <1>; > +}; > + > +&dcic1 { > + dcic_id = <0>; > + dcic_mux = "dcic-hdmi"; > + status = "okay"; > +}; > + > +&dcic2 { > + dcic_id = <1>; > + dcic_mux = "dcic-lvds1"; > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c1>; > + pinctrl-1 = <&pinctrl_i2c1_gpio>; > + scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + codec: wm8962@1a { > + compatible = "wlf,wm8962"; > + reg = <0x1a>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + DCVDD-supply = <®_audio>; > + DBVDD-supply = <®_audio>; > + AVDD-supply = <®_audio>; > + CPVDD-supply = <®_audio>; > + MICVDD-supply = <®_audio>; > + PLLVDD-supply = <®_audio>; > + SPKVDD1-supply = <®_audio>; > + SPKVDD2-supply = <®_audio>; > + gpio-cfg = < > + 0x0000 /* 0:Default */ > + 0x0000 /* 1:Default */ > + 0x0013 /* 2:FN_DMICCLK */ > + 0x0000 /* 3:Default */ > + 0x8014 /* 4:FN_DMICCDAT */ > + 0x0000 /* 5:Default */ > + >; > + amic-mono; > + }; > + > + mma8451@1c { > + compatible = "fsl,mma8451"; > + reg = <0x1c>; > + position = <0>; > + vdd-supply = <®_sensor>; > + vddio-supply = <®_sensor>; > + interrupt-parent = <&gpio1>; > + interrupts = <18 8>; > + interrupt-route = <1>; > + }; > + > + ov564x: ov564x@3c { > + compatible = "ovti,ov564x"; > + reg = <0x3c>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ipu1_2>; > + clocks = <&clks IMX6QDL_CLK_CKO>; > + clock-names = "csi_mclk"; > + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ > + AVDD-supply = <&vgen3_reg>; /* 2.8v, on rev C board > is VGEN3, > + on rev B board is > VGEN5 */ > + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ > + pwn-gpios = <&gpio1 16 1>; /* active low: SD1_DAT0 > */ > + rst-gpios = <&gpio1 17 0>; /* active high: > SD1_DAT1 */ > + csi_id = <0>; > + mclk = <24000000>; > + mclk_source = <0>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c2>; > + pinctrl-1 = <&pinctrl_i2c2_gpio>; > + scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + egalax_ts@04 { > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2_egalax_int>; > + interrupt-parent = <&gpio6>; > + interrupts = <8 2>; > + wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; > + }; > + > + max11801@48 { > + compatible = "maxim,max11801"; > + reg = <0x48>; > + interrupt-parent = <&gpio3>; > + interrupts = <26 2>; > + work-mode = <1>;/*DCM mode*/ > + }; > + > + pmic: pfuze100@08 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw2_reg: sw2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw3a_reg: sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3b_reg: sw3b { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw4_reg: sw4 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen1_reg: vgen1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen2_reg: vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen3_reg: vgen3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + }; > + }; > + > + ov564x_mipi: ov564x_mipi@3c { /* i2c2 driver */ > + compatible = "ovti,ov564x_mipi"; > + reg = <0x3c>; > + clocks = <&clks 201>; > + clock-names = "csi_mclk"; > + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ > + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is > VGEN3 > + rev B board is VGEN5 > */ > + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ > + pwn-gpios = <&gpio1 19 1>; /* active low: SD1_CLK > */ > + rst-gpios = <&gpio1 20 0>; /* active high: > SD1_DAT2 */ > + csi_id = <1>; > + mclk = <24000000>; > + mclk_source = <0>; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default", "gpio"; > + pinctrl-0 = <&pinctrl_i2c3>; > + pinctrl-1 = <&pinctrl_i2c3_gpio>; > + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + egalax_ts@04 { > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3_egalax_int>; > + interrupt-parent = <&gpio6>; > + interrupts = <7 2>; > + wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; > + }; > + > + isl29023@44 { > + compatible = "fsl,isl29023"; > + reg = <0x44>; > + rext = <499>; > + vdd-supply = <®_sensor>; > + interrupt-parent = <&gpio3>; > + interrupts = <9 2>; > + }; > + > + mag3110@0e { > + compatible = "fsl,mag3110"; > + reg = <0x0e>; > + position = <2>; > + vdd-supply = <®_sensor>; > + vddio-supply = <®_sensor>; > + interrupt-parent = <&gpio3>; > + interrupts = <16 1>; > + }; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + imx6qdl-sabresd { > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 > 0x80000000 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 > 0x80000000 > + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 > 0x80000000 > + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 > 0x80000000 > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 > 0x130b0 > + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 > 0x80000000 > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 > 0x80000000 > + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 > 0x80000000 > + MX6QDL_PAD_EIM_D26__GPIO3_IO26 > 0x80000000 > + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 > 0x80000000 > + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 > 0x80000000 > + MX6QDL_PAD_EIM_A25__GPIO5_IO02 > 0x80000000 > + MX6QDL_PAD_EIM_D23__GPIO3_IO23 > 0x80000000 > + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 > 0x80000000 > + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 > 0x80000000 > + MX6QDL_PAD_EIM_D16__GPIO3_IO16 > 0x80000000 > + > MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000 > + MX6QDL_PAD_GPIO_9__GPIO1_IO09 > 0x80000000 > + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 > 0x80000000 > + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 > 0x80000000 > + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 > 0x80000000 > + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 > 0x80000000 > + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 > 0x80000000 > + >; > + }; > + > + pinctrl_audmux: audmuxgrp { > + fsl,pins = < > + > MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 > + > MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 > + > MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 > + > MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 > + >; > + }; > + > + pinctrl_ecspi1: ecspi1grp { > + fsl,pins = < > + > MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 > + > MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 > + > MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 > + > MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c2_egalax_int: egalax_i2c2_intgrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 > 0x80000000 > + >; > + }; > + > + pinctrl_i2c3_egalax_int: egalax_i2c3_intgrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 > 0x80000000 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + > MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + > MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + > MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 > + > MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 > + > MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 > + > MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 > + > MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 > + > MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 > + > MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + > MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 > + > MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 > + > MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 > + > MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 > + > MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 > + > MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 > + > MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 > + >; > + }; > + > + pinctrl_enet_irq: enetirqgrp { > + fsl,pins = < > + > MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 > + >; > + }; > + > + pinctrl_gpio_keys: gpio_keysgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D29__GPIO3_IO29 > 0x1b0b0 > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 > 0x1b0b0 > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 > 0x1b0b0 > + >; > + }; > + > + pinctrl_hdmi_cec: hdmicecgrp { > + fsl,pins = < > + > MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0 > + >; > + }; > + > + pinctrl_hdmi_hdcp: hdmihdcpgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL > 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA > 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + > MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 > + > MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c1_gpio: i2c1grp_gpio { > + fsl,pins = < > + > MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x1b8b1 > + > MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x1b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + > MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + > MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2_gpio: i2c2grp_gpio { > + fsl,pins = < > + > MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b8b1 > + > MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + > MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + > MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3_gpio: i2c3grp_gpio { > + fsl,pins = < > + > MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b8b1 > + > MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b8b1 > + >; > + }; > + > + pinctrl_ipu1: ipu1grp { > + fsl,pins = < > + > MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 > + > MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 > + > MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 > + > MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 > + > MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x80000000 > + > MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 > + > MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 > + > MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 > + > MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 > + > MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 > + > MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 > + > MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 > + > MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 > + > MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 > + > MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 > + > MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 > + > MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 > + > MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 > + > MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 > + > MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 > + > MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 > + > MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 > + > MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 > + > MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 > + > MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 > + > MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 > + > MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 > + > MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 > + > MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 > + >; > + }; > + > + pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */ > + fsl,pins = < > + > MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000 > + > MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000 > + > MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000 > + > MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000 > + > MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000 > + > MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000 > + > MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000 > + > MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000 > + > MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000 > + > MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000 > + > MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000 > + > MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000 > + > MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000 > + > MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + > MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 > + >; > + }; > + > + pinctrl_pcie_reg: pciereggrp { > + fsl,pins = < > + > MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + > MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + > MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + > MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5_1: uart5grp-1 { > + fsl,pins = < > + > MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 > + > MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 > + > MX6QDL_PAD_KEY_COL4__UART5_RTS_B 0x1b0b1 > + > MX6QDL_PAD_KEY_ROW4__UART5_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5dte_1: uart5dtegrp-1 { > + fsl,pins = < > + > MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1 > + > MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1 > + > MX6QDL_PAD_KEY_ROW4__UART5_RTS_B 0x1b0b1 > + > MX6QDL_PAD_KEY_COL4__UART5_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + > MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + > MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + > MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + > MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + > MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + > MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + > MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + > MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 > + > MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 > + > MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 > + > MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + u-boot,dm-spl; > + fsl,pins = < > + > MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + > MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + > MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + > MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + > MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + > MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + > MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + > MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + > MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + > MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + >; > + }; > + > + pinctrl_usdhc4: usdhc4grp { > + fsl,pins = < > + > MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > + > MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 > + > MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > + > MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > + > MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > + > MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > + > MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 > + > MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 > + > MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 > + > MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__WDOG2_B 0x80000000 > + >; > + }; > + }; > + > + gpio_leds { > + pinctrl_gpio_leds: gpioledsgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 > + >; > + }; > + }; > +}; > + > +&ldb { > + status = "okay"; > + > + lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + }; > + }; > + }; > + > + lvds-channel@1 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + primary; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing1>; > + timing1: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + }; > + }; > + }; > +}; > + > +&mipi_csi { > + status = "okay"; > + ipu_id = <0>; > + csi_id = <1>; > + v_channel = <0>; > + lanes = <2>; > +}; > + > +&mipi_dsi { > + dev_id = <0>; > + disp_id = <1>; > + lcd_panel = "TRULY-WVGA"; > + disp-power-on-supply = <®_mipi_dsi_pwr_on>; > + resets = <&mipi_dsi_reset>; > + status = "okay"; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + reset-gpio = <&gpio7 12 0>; > + status = "okay"; > +}; > + > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + status = "okay"; > +}; > + > +&snvs_poweroff { > + status = "okay"; > +}; > + > +&ssi2 { > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_h1_vbus>; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <®_usb_otg_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + disable-over-current; > + srp-disable; > + hnp-disable; > + adp-disable; > + status = "okay"; > +}; > + > +&usbphy1 { > + tx-d-cal = <0x5>; > +}; > + > +&usbphy2 { > + tx-d-cal = <0x5>; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + bus-width = <8>; > + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > + no-1-8-v; > + keep-power-in-suspend; > + enable-sdio-wakeup; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + bus-width = <8>; > + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; > + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; > + no-1-8-v; > + keep-power-in-suspend; > + enable-sdio-wakeup; > + u-boot,dm-spl; > + status = "okay"; > +}; > + > +&usdhc4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc4>; > + bus-width = <8>; > + non-removable; > + no-1-8-v; > + keep-power-in-suspend; > + status = "okay"; > +}; > + > +&wdog1 { > + status = "disabled"; > +}; > + > +&wdog2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,wdog_b; > + status = "okay"; > +}; Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgp1qfmpGzP4z.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
