[Abel, please trim the CC list next time. I tried to keep it shorter so that U-Boot list does not complain about the large number of recipients]
On Wed, Jan 16, 2019 at 12:14 PM Abel Vesa <abel.v...@nxp.com> wrote: > > Add the DM_GPIO related config for mx6sabresd. > Also add the gpio request calls. > > Signed-off-by: Abel Vesa <abel.v...@nxp.com> > --- > board/freescale/mx6sabresd/mx6sabresd.c | 5 +++++ > configs/mx6sabresd_defconfig | 1 + > 2 files changed, 6 insertions(+) > > diff --git a/board/freescale/mx6sabresd/mx6sabresd.c > b/board/freescale/mx6sabresd/mx6sabresd.c > index 0183ede..e3db2fd 100644 > --- a/board/freescale/mx6sabresd/mx6sabresd.c > +++ b/board/freescale/mx6sabresd/mx6sabresd.c > @@ -96,6 +96,7 @@ static void setup_iomux_enet(void) > SETUP_IOMUX_PADS(enet_pads); > > /* Reset AR8031 PHY */ > + gpio_request(IMX_GPIO_NR(1, 25), "ENET PHY Reset"); > gpio_direction_output(IMX_GPIO_NR(1, 25) , 0); > mdelay(10); > gpio_set_value(IMX_GPIO_NR(1, 25), 1); What about using the 'phy-reset-gpios' property instead of having this board C code? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
