On Fri, Jan 11, 2019 at 12:13 AM Jagan Teki <ja...@amarulasolutions.com> wrote: > > This series fixes few comments from previous verision for Allwinner > clock gates, resets and dropped clock tree patches which I have > mentioned on previous series[1]. > > Changes for v6: > - use ARRAY_SIZE for reset array instead of number > - remove comment from sunxi_reset_request > - Enable CONFIG_USB_OHCI_HCD on few missing boards > - collect Marek Acked-by > > Any inputs, > Jagan. > > [1] https://patchwork.ozlabs.org/cover/1019654/ > > Jagan Teki (20): > clk: Add Allwinner A64 CLK driver > reset: Add Allwinner RESET driver > clk: sunxi: Add Allwinner H3/H5 CLK driver > clk: sunxi: Add Allwinner A10/A20 CLK driver > clk: sunxi: Add Allwinner A10s/A13 CLK driver > clk: sunxi: Add Allwinner A31 CLK driver > clk: sunxi: Add Allwinner A23/A33 CLK driver > clk: sunxi: Add Allwinner A83T CLK driver > clk: sunxi: Add Allwinner R40 CLK driver > clk: sunxi: Add Allwinner V3S CLK driver > clk: sunxi: Implement UART clocks > clk: sunxi: Implement UART resets > clk: sunxi: Add Allwinner H6 CLK driver > sunxi: A64: Update sun50i-a64-ccu.h > sunxi: Enable CLK > phy: sun4i-usb: Use CLK and RESET support > reset: Add reset valid > musb-new: sunxi: Use CLK and RESET support > sunxi: usb: Switch to Generic host controllers > usb: host: Drop [e-o]hci-sunxi drivers
Applied to u-boot-sunxi/master _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
