This is to support SPL for i.MX8QXP MEK board and default support SPL. In this patchset, use SPL FIT, but actually we could not use SPL FIT for secure boot, in NXP vendor tree, there is another format called container, NXP use SPL + container for secure boot. The container support is on my TODO list. But to make SPL work in upstream, use SPL FIT here.
Peng Fan (10): imx8qxp: add SUPPORT_SPL option imx8: scu: use dedicated MU for SPL arm: imx: build mach-imx for i.MX8 gpio: introduce CONFIG_SPL_DM_PCA953X spl: imx8: add spl boot device dts: imx8qxp-mek: introduce u-boot dtsi imx: mkimage_fit_atf: introduce BL33_BASE_ADDR imx: build flash.bin for i.MX8 imx8qxp: mek: default enable SPL imx8qxp: mek: update README Makefile | 2 +- arch/arm/Makefile | 2 +- arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 112 +++++++++++++++++++++++++++++++ arch/arm/dts/fsl-imx8qxp-mek.dts | 1 + arch/arm/mach-imx/Makefile | 15 ++++- arch/arm/mach-imx/imx8/Kconfig | 8 +++ arch/arm/mach-imx/mkimage_fit_atf.sh | 3 +- arch/arm/mach-imx/spl.c | 14 +++- board/freescale/imx8qxp_mek/Makefile | 1 + board/freescale/imx8qxp_mek/README | 8 ++- board/freescale/imx8qxp_mek/imximage.cfg | 4 +- board/freescale/imx8qxp_mek/spl.c | 75 +++++++++++++++++++++ configs/imx8qxp_mek_defconfig | 24 +++++++ drivers/gpio/Kconfig | 23 +++++++ drivers/gpio/Makefile | 2 +- drivers/misc/imx8/scu.c | 4 ++ include/configs/imx8qxp_mek.h | 26 +++++++ 17 files changed, 311 insertions(+), 13 deletions(-) create mode 100644 arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi create mode 100644 board/freescale/imx8qxp_mek/spl.c -- 2.14.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
