Hi Karl On Tue, Dec 18, 2018 at 7:12 PM Karl Palsson <ka...@tweak.net.au> wrote: > > > Jagan Teki <ja...@amarulasolutions.com> wrote: > > It's 4 days before, "U-Boot] sunxi: regression in dram init for > > h3 board" > > > > 7 days is not 4-days :) > > True, it was last week, not a week ago. > > > I would expect some debugging on this during these days and > > find the real root cause. > > Just so there's no unmet expectations here, I'm not doing any > _debugging_ of this. (Nor do I have any planned) Given that this > is a regression in working devices, I would _presume_ (quite > likely wrongly) that the honus of debugging this would be on the > people who suggested this patch, not people affected by it. I'm > happy to test things, but I have zero experience with dram init, > (only marginally greater than zero experience with uboot overall) > and no sane methods for debugging this further, nor enough > devices to give any test confidence that any debugging I could do > would be useful. >
Do you have error after relocation or before relocation? Does it go outside and print DRAM size? Michael > Sincerely, > Karl P_______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
