On Thu, Nov 29, 2018 at 3:30 PM Jean-Jacques Hiblot <jjhib...@ti.com> wrote: > > UCLASS_USB_DEV_GENERIC was meant for USB devices connected to host > controllers, not gadget devices. > Adding a new UCLASS for gadget devices alone. > > Also move the generic DM code for USB gadgets in a separate file for > clarity. > > Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com> > > --- > > Changes in v4: None > Changes in v3: None > Changes in v2: None > > board/sunxi/board.c | 2 +- > drivers/usb/dwc3/dwc3-generic.c | 2 +- > drivers/usb/gadget/ether.c | 2 +- > drivers/usb/gadget/udc/Makefile | 4 +++ > drivers/usb/gadget/udc/udc-core.c | 41 -------------------------- > drivers/usb/gadget/udc/udc-uclass.c | 58 > +++++++++++++++++++++++++++++++++++++ > drivers/usb/musb-new/omap2430.c | 2 +- > drivers/usb/musb-new/sunxi.c | 2 +- > include/dm/uclass-id.h | 1 + > 9 files changed, 68 insertions(+), 46 deletions(-) > create mode 100644 drivers/usb/gadget/udc/udc-uclass.c > > diff --git a/board/sunxi/board.c b/board/sunxi/board.c > index 64ccbc7..9b36cc7 100644 > --- a/board/sunxi/board.c > +++ b/board/sunxi/board.c > @@ -663,7 +663,7 @@ int g_dnl_board_usb_cable_connected(void) > struct phy phy; > int ret; > > - ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev); > + ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
This is breaking sunxi boards which uses gadget mode. U-Boot 2019.01-rc2 (Dec 18 2018 - 17:31:53 +0530) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Banana Pi BPI-M2-Plus DRAM: 1 GiB Error binding driver 'sunxi-musb': -96 Some drivers failed to bind Error binding driver 'generic_simple_bus': -96 Some drivers failed to bind initcall sequence 7dfd127c failed at call 4a00c3a3 (err=-96) ### ERROR ### Please RESET the board ### _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
