Hi Daniel, On dim., déc. 16 2018, Gregory CLEMENT <gregory.clem...@bootlin.com> wrote:
> Hi Daniel, > > On sam., déc. 15 2018, Daniel Schwierzeck <daniel.schwierz...@gmail.com> > wrote: > >> Am 14.12.18 um 16:16 schrieb Gregory CLEMENT: >>> Adding the support for the Luton boards PCB91 which share common code with >>> the Ocelots boards, including board code, device tree and configuration. >>> >>> Signed-off-by: Gregory CLEMENT <gregory.clem...@bootlin.com> >>> --- >>> MAINTAINERS | 1 + >>> arch/mips/dts/luton_pcb091.dts | 36 ++++++++++++++ >>> arch/mips/dts/mscc,luton.dtsi | 87 ++++++++++++++++++++++++++++++++++ >>> arch/mips/mach-mscc/Kconfig | 2 + >>> board/mscc/luton/Kconfig | 14 ++++++ >>> board/mscc/luton/Makefile | 3 ++ >>> board/mscc/luton/luton.c | 28 +++++++++++ >>> configs/mscc_luton_defconfig | 66 ++++++++++++++++++++++++++ >>> 8 files changed, 237 insertions(+) >>> create mode 100644 arch/mips/dts/luton_pcb091.dts >>> create mode 100644 arch/mips/dts/mscc,luton.dtsi >>> create mode 100644 board/mscc/luton/Kconfig >>> create mode 100644 board/mscc/luton/Makefile >>> create mode 100644 board/mscc/luton/luton.c >>> create mode 100644 configs/mscc_luton_defconfig >>> >> >>> diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig >>> new file mode 100644 >>> index 0000000000..47fe12b6ee >>> --- /dev/null >>> +++ b/configs/mscc_luton_defconfig >>> @@ -0,0 +1,66 @@ >>> +CONFIG_MIPS=y >>> +CONFIG_SYS_TEXT_BASE=0x40000000 >>> +CONFIG_SYS_MALLOC_F_LEN=0x2000 >>> +CONFIG_DEBUG_UART_BOARD_INIT=y >>> +CONFIG_DEBUG_UART_BASE=0x70100000 >>> +CONFIG_DEBUG_UART_CLOCK=208333333 >>> +CONFIG_ARCH_MSCC=y >>> +CONFIG_TARGET_LUTON_PCB091=y >>> +CONFIG_DDRTYPE_MT47H128M8HQ=y >>> +CONFIG_SYS_LITTLE_ENDIAN=y >>> +CONFIG_MIPS_BOOT_FDT=y >>> +CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091" >>> +CONFIG_DEBUG_UART=y >>> +CONFIG_FIT=y >>> +CONFIG_BOOTDELAY=3 >>> +CONFIG_USE_BOOTARGS=y >>> +CONFIG_BOOTARGS="console=ttyS0,115200" >>> +CONFIG_LOGLEVEL=7 >>> +CONFIG_DISPLAY_CPUINFO=y >>> +CONFIG_SYS_PROMPT="pcb091 # " >>> +# CONFIG_CMD_BDI is not set >>> +# CONFIG_CMD_CONSOLE is not set >>> +# CONFIG_CMD_ELF is not set >>> +# CONFIG_CMD_EXPORTENV is not set >>> +# CONFIG_CMD_IMPORTENV is not set >>> +# CONFIG_CMD_CRC32 is not set >>> +CONFIG_CMD_MD5SUM=y >>> +CONFIG_CMD_MEMINFO=y >>> +CONFIG_CMD_MEMTEST=y >>> +# CONFIG_CMD_FLASH is not set >>> +CONFIG_CMD_GPIO=y >>> +CONFIG_CMD_SF=y >>> +CONFIG_CMD_SPI=y >>> +CONFIG_CMD_DHCP=y >>> +# CONFIG_NET_TFTP_VARS is not set >>> +# CONFIG_CMD_NFS is not set >>> +CONFIG_CMD_PING=y >>> +CONFIG_CMD_MTDPARTS=y >>> +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" >>> +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m@1m(linux)" >>> +# CONFIG_ISO_PARTITION is not set >>> +CONFIG_OF_EMBED=y >> >> this gives now a build warning >> >> ===================== WARNING ====================== >> CONFIG_OF_EMBED is enabled. This option should only >> be used for debugging purposes. Please use >> CONFIG_OF_SEPARATE for boards in mainline. >> See doc/README.fdt-control for more info. >> ==================================================== > > I did not get this warning. For now I base my series on v2018.11, > should I base it on v2019.01-rc1 (i didn't realized it was already > released) ? > >> >> >> Shall I change it when applying or do you want to test it first and send >> a follow-up patch? > > I'd like to test it to be sure it continue to work. I had a closer look on this issue and actually we have already a patch series to apply which it is planned to be sent very soon. With this new series we will be able to support multiple boards with this series CONFIG_OF_SEPARATE will be used instead of CONFIG_OF_EMBED. Would it be possible to keep this series as is ? Thanks, Gregory > > Thanks, > > Gregory > >> >>> +CONFIG_ENV_IS_IN_SPI_FLASH=y >>> +CONFIG_NET_RANDOM_ETHADDR=y >>> +CONFIG_CLK=y >>> +CONFIG_DM_GPIO=y >>> +CONFIG_DM_SPI_FLASH=y >>> +CONFIG_SPI_FLASH=y >>> +CONFIG_SPI_FLASH_BAR=y >>> +CONFIG_SPI_FLASH_GIGADEVICE=y >>> +CONFIG_SPI_FLASH_MACRONIX=y >>> +CONFIG_SPI_FLASH_SPANSION=y >>> +CONFIG_SPI_FLASH_STMICRO=y >>> +CONFIG_SPI_FLASH_WINBOND=y >>> +CONFIG_SPI_FLASH_MTD=y >>> +CONFIG_DM_ETH=y >>> +CONFIG_PINCTRL=y >>> +CONFIG_PINCONF=y >>> +CONFIG_DM_SERIAL=y >>> +CONFIG_DEBUG_UART_SHIFT=2 >>> +CONFIG_SYS_NS16550=y >>> +CONFIG_SPI=y >>> +CONFIG_DM_SPI=y >>> +CONFIG_SOFT_SPI=y >>> +CONFIG_LZMA=y >>> +CONFIG_XZ=y >>> >> >> -- >> - Daniel > > -- > Gregory Clement, Bootlin > Embedded Linux and Kernel engineering > http://bootlin.com > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
