Am 14.12.18 um 16:16 schrieb Gregory CLEMENT: > Adding the support for the Luton boards PCB91 which share common code with > the Ocelots boards, including board code, device tree and configuration. > > Signed-off-by: Gregory CLEMENT <gregory.clem...@bootlin.com> > --- > MAINTAINERS | 1 + > arch/mips/dts/luton_pcb091.dts | 36 ++++++++++++++ > arch/mips/dts/mscc,luton.dtsi | 87 ++++++++++++++++++++++++++++++++++ > arch/mips/mach-mscc/Kconfig | 2 + > board/mscc/luton/Kconfig | 14 ++++++ > board/mscc/luton/Makefile | 3 ++ > board/mscc/luton/luton.c | 28 +++++++++++ > configs/mscc_luton_defconfig | 66 ++++++++++++++++++++++++++ > 8 files changed, 237 insertions(+) > create mode 100644 arch/mips/dts/luton_pcb091.dts > create mode 100644 arch/mips/dts/mscc,luton.dtsi > create mode 100644 board/mscc/luton/Kconfig > create mode 100644 board/mscc/luton/Makefile > create mode 100644 board/mscc/luton/luton.c > create mode 100644 configs/mscc_luton_defconfig >
> diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig > new file mode 100644 > index 0000000000..47fe12b6ee > --- /dev/null > +++ b/configs/mscc_luton_defconfig > @@ -0,0 +1,66 @@ > +CONFIG_MIPS=y > +CONFIG_SYS_TEXT_BASE=0x40000000 > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > +CONFIG_DEBUG_UART_BOARD_INIT=y > +CONFIG_DEBUG_UART_BASE=0x70100000 > +CONFIG_DEBUG_UART_CLOCK=208333333 > +CONFIG_ARCH_MSCC=y > +CONFIG_TARGET_LUTON_PCB091=y > +CONFIG_DDRTYPE_MT47H128M8HQ=y > +CONFIG_SYS_LITTLE_ENDIAN=y > +CONFIG_MIPS_BOOT_FDT=y > +CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091" > +CONFIG_DEBUG_UART=y > +CONFIG_FIT=y > +CONFIG_BOOTDELAY=3 > +CONFIG_USE_BOOTARGS=y > +CONFIG_BOOTARGS="console=ttyS0,115200" > +CONFIG_LOGLEVEL=7 > +CONFIG_DISPLAY_CPUINFO=y > +CONFIG_SYS_PROMPT="pcb091 # " > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_CONSOLE is not set > +# CONFIG_CMD_ELF is not set > +# CONFIG_CMD_EXPORTENV is not set > +# CONFIG_CMD_IMPORTENV is not set > +# CONFIG_CMD_CRC32 is not set > +CONFIG_CMD_MD5SUM=y > +CONFIG_CMD_MEMINFO=y > +CONFIG_CMD_MEMTEST=y > +# CONFIG_CMD_FLASH is not set > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_SPI=y > +CONFIG_CMD_DHCP=y > +# CONFIG_NET_TFTP_VARS is not set > +# CONFIG_CMD_NFS is not set > +CONFIG_CMD_PING=y > +CONFIG_CMD_MTDPARTS=y > +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" > +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m@1m(linux)" > +# CONFIG_ISO_PARTITION is not set > +CONFIG_OF_EMBED=y this gives now a build warning ===================== WARNING ====================== CONFIG_OF_EMBED is enabled. This option should only be used for debugging purposes. Please use CONFIG_OF_SEPARATE for boards in mainline. See doc/README.fdt-control for more info. ==================================================== Shall I change it when applying or do you want to test it first and send a follow-up patch? > +CONFIG_ENV_IS_IN_SPI_FLASH=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_CLK=y > +CONFIG_DM_GPIO=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_BAR=y > +CONFIG_SPI_FLASH_GIGADEVICE=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_SPI_FLASH_SPANSION=y > +CONFIG_SPI_FLASH_STMICRO=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_SPI_FLASH_MTD=y > +CONFIG_DM_ETH=y > +CONFIG_PINCTRL=y > +CONFIG_PINCONF=y > +CONFIG_DM_SERIAL=y > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYS_NS16550=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_SOFT_SPI=y > +CONFIG_LZMA=y > +CONFIG_XZ=y > -- - Daniel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
