Hi Philipp, On Fri, 14 Dec 2018 at 09:04, Philipp Tomsich <philipp.toms...@theobroma-systems.com> wrote: > > > > On 14.12.2018, at 16:37, Simon Glass <s...@chromium.org> wrote: > > Hi, > > On Mon, 10 Dec 2018 at 18:07, Simon Glass <s...@chromium.org> wrote: > > > Hi Philipp, > > On Tue, 27 Nov 2018 at 15:00, Philipp Tomsich > <philipp.toms...@theobroma-systems.com> wrote: > > > The original bootcount methods do not provide an interface to DM and > rely on a static configuration for I2C devices (e.g. bus, chip-addr, > etc. are configured through defines statically). On a modern system > that exposes multiple devices in a DTS-configurable way, this is less > than optimal and a interface to DM-based devices will be desirable. > > This adds a simple driver that is DM-aware and configurable via DTS. > If ambiguous (i.e. multiple bootcount-devices are present) the > /chosen/u-boot,bootcount-device property can be used to select one > bootcount device. > > Initially, this provides support for the following DM devices: > * RTC devices > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > Tested-by: Klaus Goger <klaus.go...@theobroma-systems.com> > > --- > > Changes in v2: > - changed to provide a UCLASS-based implementation, as requested by > SJG in his earlier review > - split off the RV3029 driver into a separate series > > doc/device-tree-bindings/chosen.txt | 30 ++++++++++++ > drivers/bootcount/Kconfig | 8 ++++ > drivers/bootcount/Makefile | 2 + > drivers/bootcount/bootcount-uclass.c | 93 ++++++++++++++++++++++++++++++++++++ > include/bootcount.h | 48 +++++++++++++++++++ > include/dm/uclass-id.h | 1 + > 6 files changed, 182 insertions(+) > create mode 100644 drivers/bootcount/bootcount-uclass.c > > > Just checking if there is a text and sandbox driver for this? > > > Oops I meant test, sorry. All uclasses should have a test. > > > Not yet, I’ll get started on it. > So now I know why I had initially tried to avoid making this a uclass ;-)
Well let me rephrase it...we should have tests for all common code in U-Boot :-) It's normally a very small amount of work, particularly for something like this. Keep it simple. - Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot