On Tue, Dec 11, 2018 at 8:32 PM Anup Patel <a...@brainfault.org> wrote: > > This patchset adds SiFive UART driver for SiFive UART > found on SiFive boards. > > The driver is tested on QEMU sifive_u machine. In fact, > with this patchset same U-Boot binary boots on QEMU virt > machine and QEMU sifive_u machine in both M-mode and > S-mode. > > The patches are based upon latest RISC-V UBoot tree > (git://git.denx.de/u-boot-riscv.git) at commit id > 48cbf6246052de10d35b616b5efb2f783904a49d > > Changes since v1: > - Fixed copyright header in SiFive UART driver > - Imply SIFIVE_SERIAL for QEMU emulation instead > of enabling it in defconfigs. > > Anup Patel (2): > drivers: serial: Add SiFive UART driver > riscv: qemu: Imply SIFIVE_SERIAL for emulation > > board/emulation/qemu-riscv/Kconfig | 1 + > drivers/serial/Kconfig | 13 ++ > drivers/serial/Makefile | 1 + > drivers/serial/serial_sifive.c | 191 +++++++++++++++++++++++++++++ > 4 files changed, 206 insertions(+) > create mode 100644 drivers/serial/serial_sifive.c > > -- > 2.17.1 >
Hi Rick, The required QEMU fix has been submitted by Alistair Francis on QEMU mailing list. (QEMU PATCH subject "sifive_u: Set 'clock-frequency' DT property for SiFive UART") Can you please consider this series for U-Boot v2019.01? Thanks, Anup _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
