Hi Lukas,
On Tue, Dec 11, 2018 at 8:01 AM Auer, Lukas
<lukas.a...@aisec.fraunhofer.de> wrote:
>
> Hi Bin,
>
> On Fri, 2018-12-07 at 06:14 -0800, Bin Meng wrote:
> > Implement arch_cpu_init() to do some basic architecture level cpu
> > initialization, like FPU enable, etc.
> >
> > Signed-off-by: Bin Meng <bmeng...@gmail.com>
> >
> > ---
> >
> > Changes in v2:
> > - use csr_set() to set MSTATUS_FS
> > - only enabling the cycle, time, and instret counters
> > - change to use satp
> >
> > arch/riscv/cpu/cpu.c | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
> > index 3858e51..194799c 100644
> > --- a/arch/riscv/cpu/cpu.c
> > +++ b/arch/riscv/cpu/cpu.c
> > @@ -7,6 +7,7 @@
> > #include <cpu.h>
> > #include <log.h>
> > #include <asm/csr.h>
> > +#include <asm/encoding.h>
> >
> > /*
> > * prior_stage_fdt_address must be stored in the data section since
> > it is used
> > @@ -67,3 +68,21 @@ int arch_early_init_r(void)
> >
> > return 0;
> > }
> > +
> > +int arch_cpu_init(void)
> > +{
> > + /* Enable FPU */
> > + if (supports_extension('d') || supports_extension('f')) {
>
> supports_extension does not work when running in supervisor mode
> (unless BBL is patched). Can we maybe use the CPU driver here?
>
Yes, I think so. Will change to use info provided by the CPU driver in v3.
> > + csr_set(MODE_PREFIX(status), MSTATUS_FS);
> > + csr_write(fcsr, 0);
> > + }
> > +
> > + /* Enable perf counters for cycle, time, and instret counters
> > only */
> > + csr_write(MODE_PREFIX(counteren), GENMASK(2, 0));
>
> I would tend to only enable this in mcounteren, so for the supervisor-
> mode. Linux can still enable the counters for user-mode if required.
>
OK.
> > +
> > + /* Disable paging */
> > + if (supports_extension('s'))
> > + csr_write(satp, 0);
>
> This should only be done, when running in machine mode. In supervisor
> mode this would cause issues if we have something other than an
> identity-mapping or paging disabled.
>
I doubt we want to enable paging for S-mode U-Boot, but I am OK to do
such in M-mode only.
Regards,
Bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
