Hi Tom, Here are patches for v2019.01 which I have put together.
Travis build is still running that's why will see how it will look like. https://travis-ci.org/michalsimek/u-boot/builds/462865171 I can't see any problem with patches now and wanted to get this to your attention because of end of MW. Thanks, Michal The following changes since commit 5830791d91d1200854ef78fcb32f808c8080f0f0: Merge tag 'pull-tg18' of git://git.denx.de/u-boot-dm (2018-11-23 17:25:27 -0500) are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2019.01 for you to fetch changes up to 5f68f44c14ab93ffc44a9285e0970cba467276c6: net: zynq_gem: Add check for 64-bit dma support by hardware (2018-12-03 16:22:06 +0100) ---------------------------------------------------------------- Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support ---------------------------------------------------------------- Martin Lund (1): mtd: nand: Arasan: Add subpage configuration support Michal Simek (27): arm64: zynqmp: Enable SPL gzip support for zcu102 and zcu100 ARM: zynq: Guard zynq_help_text with CONFIG_SYS_LONGHELP ARM: zynq: cse: Disable distro bootcommands ARM: zynq: cse: Disable autoboot feature ARM: zynq: cse: Shrink u-boot size arm64: zynqmp: Disable bootelf and fdt commands for mini configurations arm64: zynqmp: Reflect emmc controller ID in model in DT microblaze: Use standard functions for memory decoding microblaze: Showing model information from DT by default arm64: zynqmp: Enable SPL_SEPARATE_BSS by default arm64: zynqmp: Wire spi-flash compatible string with flashes arm64: zynqmp: Fix sdhci clock in emmc0 mini configuration arm64: zynqmp: Disable ltc2952 poweroff chip arm64: zynqmp: Setup clock-output-names for si570 chips ARM: zynq: Wire SPL configuration for cse nor/nand targets ARM: zynq: Enable mtest command at least on one platform ARM: zynq: Disable net for cse nor/nand arm64: zynqmp: Disable autoboot feature for mini arm64: zynqmp: Enable SPL for mini qspi configuration arm64: zynqmp: Disable BOOTCOMMAND arm64: zynqmp: Do not use any EXTRA_ENV_SETTINGS arm64: zynqmp: Do not save variables about board arm64: zynqmp: Use minimal size for environment variables arm64: zynqmp: Add mini mtest configuration arm64: zynqmp: Start usb ethernet gadget automatically arm64: zynqmp: Wire mini-emmc0 configuration with zcu100 arm64: zynqmp: Wire mini-emmc1 configuration with zcu102 Siva Durga Prasad Paladugu (4): arm64: zynqmp: Fix logic in CG/EG/EV detection arm: zynq: cse_qspi: Fix overwriting spi-rx-bus-width property arm64: zynqmp: Define and enable qspi node for DC4 board net: zynq_gem: Add check for 64-bit dma support by hardware T Karthik Reddy (1): arm64: zynqmp: Add new header file for zcu104 RevC Vipul Kumar (1): net: zynq_gem: Added 64-bit addressing support arch/arm/Kconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/zynq-cse-qspi-single.dts | 2 +- arch/arm/dts/zynq-cse-qspi.dtsi | 2 +- arch/arm/dts/zynqmp-mini-emmc0.dts | 3 ++- arch/arm/dts/zynqmp-mini-emmc1.dts | 2 +- arch/arm/dts/zynqmp-mini.dts | 40 ++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/zynqmp-zc1232-revA.dts | 2 +- arch/arm/dts/zynqmp-zc1254-revA.dts | 2 +- arch/arm/dts/zynqmp-zc1275-revA.dts | 2 +- arch/arm/dts/zynqmp-zc1275-revB.dts | 2 +- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 2 +- arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 29 +++++++++++++++++++++++++++++ arch/arm/dts/zynqmp-zcu100-revC.dts | 1 + arch/arm/dts/zynqmp-zcu102-revA.dts | 2 ++ arch/arm/dts/zynqmp-zcu104-revA.dts | 2 +- arch/arm/dts/zynqmp-zcu104-revC.dts | 2 +- arch/arm/dts/zynqmp-zcu106-revA.dts | 4 +++- arch/arm/dts/zynqmp-zcu111-revA.dts | 4 +++- board/xilinx/microblaze-generic/microblaze-generic.c | 27 +++------------------------ board/xilinx/zynq/cmds.c | 2 ++ board/xilinx/zynq/zynq-cse-nand | 1 + board/xilinx/zynq/zynq-cse-nor | 1 + board/xilinx/zynqmp/zynqmp-mini | 1 + board/xilinx/zynqmp/zynqmp-mini-emmc0 | 1 + board/xilinx/zynqmp/zynqmp-mini-emmc1 | 1 + board/xilinx/zynqmp/zynqmp-mini-qspi | 1 + board/xilinx/zynqmp/zynqmp.c | 52 +++++++++++++++++++++++++++++++++++++++++----------- configs/avnet_ultra96_rev1_defconfig | 1 + configs/microblaze-generic_defconfig | 1 + configs/xilinx_zynqmp_mini_defconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ configs/xilinx_zynqmp_mini_emmc0_defconfig | 11 ++++++++--- configs/xilinx_zynqmp_mini_emmc1_defconfig | 11 ++++++++--- configs/xilinx_zynqmp_mini_nand_defconfig | 5 ++--- configs/xilinx_zynqmp_mini_qspi_defconfig | 8 ++++++-- configs/xilinx_zynqmp_zcu100_revC_defconfig | 1 + configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 + configs/xilinx_zynqmp_zcu104_revC_defconfig | 3 ++- configs/zynq_cse_nand_defconfig | 6 +++++- configs/zynq_cse_nor_defconfig | 7 +++++-- configs/zynq_cse_qspi_defconfig | 7 ++++--- configs/zynq_zc702_defconfig | 1 + drivers/mtd/nand/raw/arasan_nfc.c | 4 ++++ drivers/net/zynq_gem.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------- include/configs/xilinx_zynqmp_mini.h | 3 +++ include/configs/xilinx_zynqmp_zcu104_revC.h | 17 +++++++++++++++++ 46 files changed, 342 insertions(+), 76 deletions(-) create mode 100644 arch/arm/dts/zynqmp-mini.dts create mode 120000 board/xilinx/zynq/zynq-cse-nand create mode 120000 board/xilinx/zynq/zynq-cse-nor create mode 120000 board/xilinx/zynqmp/zynqmp-mini create mode 120000 board/xilinx/zynqmp/zynqmp-mini-emmc0 create mode 120000 board/xilinx/zynqmp/zynqmp-mini-emmc1 create mode 120000 board/xilinx/zynqmp/zynqmp-mini-qspi create mode 100644 configs/xilinx_zynqmp_mini_defconfig create mode 100644 include/configs/xilinx_zynqmp_zcu104_revC.h -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
