On 03.12.2018 10:24, Lukasz Majewski wrote: > This commit provides code to add proper entry to Kconfig to enable > support for VF610 device tree aware driver.
Looks like a start, but ideally we should also move all the board/system specific properties to device-tree (e.g. CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES). -- Stefan > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > > --- > > drivers/mtd/nand/raw/Kconfig | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig > index 008f7b4b4b..fd1723feda 100644 > --- a/drivers/mtd/nand/raw/Kconfig > +++ b/drivers/mtd/nand/raw/Kconfig > @@ -88,6 +88,15 @@ config NAND_VF610_NFC > The driver supports a maximum 2k page size. The driver > currently does not support hardware ECC. > > +if NAND_VF610_NFC > + > +config NAND_VF610_NFC_DT > + bool "Support Vybrid's vf610 NAND controller as a DT device" > + depends on OF_CONTROL && MTD > + help > + Enable the driver for Vybrid's vf610 NAND flash on platforms > + using device tree. > + > choice > prompt "Hardware ECC strength" > depends on NAND_VF610_NFC > @@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES > > endchoice > > +endif > + > config NAND_PXA3XX > bool "Support for NAND on PXA3xx and Armada 370/XP/38x" > select SYS_NAND_SELF_INIT _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
