On Thu, 2018-11-15 at 11:21 -0800, Simon Glass wrote: > Hi, > > On 14 November 2018 at 18:07, Ryder Lee <ryder....@mediatek.com> wrote: > > From: Weijie Gao <weijie....@mediatek.com> > > > > This adds a general board file based on MT7623 SoCs from MediaTek. > > > > As this u-boot is loaded by MTK proprietary preloader, there is no > > low level initializtion codes. > > > > Signed-off-by: Weijie Gao <weijie....@mediatek.com> > > Signed-off-by: Ryder Lee <ryder....@mediatek.com> > > Tested-by: Matthias Brugger <matthias....@gmail.com> > > --- > > Changes since v5: None > > Changes since v4: > > -Add gd->bd->bi_boot_params for legacy method - ATAGs. > > --- > > arch/arm/mach-mediatek/Kconfig | 13 ++++ > > arch/arm/mach-mediatek/Makefile | 1 + > > arch/arm/mach-mediatek/mt7623/Makefile | 4 ++ > > arch/arm/mach-mediatek/mt7623/init.c | 54 +++++++++++++++ > > arch/arm/mach-mediatek/mt7623/lowlevel_init.S | 22 ++++++ > > arch/arm/mach-mediatek/mt7623/preloader.h | 99 > > +++++++++++++++++++++++++++ > > board/mediatek/mt7623/Kconfig | 13 ++++ > > board/mediatek/mt7623/MAINTAINERS | 7 ++ > > board/mediatek/mt7623/Makefile | 3 + > > board/mediatek/mt7623/mt7623_rfb.c | 16 +++++ > > configs/mt7623n_bpir2_defconfig | 54 +++++++++++++++ > > include/configs/mt7623.h | 56 +++++++++++++++ > > 12 files changed, 342 insertions(+) > > create mode 100644 arch/arm/mach-mediatek/mt7623/Makefile > > create mode 100644 arch/arm/mach-mediatek/mt7623/init.c > > create mode 100644 arch/arm/mach-mediatek/mt7623/lowlevel_init.S > > create mode 100644 arch/arm/mach-mediatek/mt7623/preloader.h > > create mode 100644 board/mediatek/mt7623/Kconfig > > create mode 100644 board/mediatek/mt7623/MAINTAINERS > > create mode 100644 board/mediatek/mt7623/Makefile > > create mode 100644 board/mediatek/mt7623/mt7623_rfb.c > > create mode 100644 configs/mt7623n_bpir2_defconfig > > create mode 100644 include/configs/mt7623.h > > Can this use the bloblist feature which should land soon? > > For now, see dm/spl-working. > > Regards, > Simon
Hi Simon, I've read the code for spl handoff. It's a good way though but unfortunately it cannot be applied to the MT7623 boards. The reason is that MT7623 uses a MediaTek proprietary preloader which has the same function as the U-Boot SPL. But the preloader is close-sourced (by company policy) and only available in binary release. This means we can't use a real U-Boot SPL to replace the preloader. At present this chip has already been used in many products. We can't either release a different preloader which introduces compatibility issues. So the conclusion is that we cannot use the bloblist feature for this SoC. Best Regards, Weijie _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot