On 03.11.18 12:28, Akash Gajjar wrote:
> Rockpro64 is rk3399 based board from pine64.org. add initial board support for
> Rockpro64. complete board support will be added later in upcoming patchsets.
>
> Signed-off-by: Akash Gajjar <ak...@openedev.com>
> ---
[...]
> diff --git a/board/rockchip/rockpro64/rockpro64.c
> b/board/rockchip/rockpro64/rockpro64.c
> new file mode 100644
> index 0000000000..74c7a56bd5
> --- /dev/null
> +++ b/board/rockchip/rockpro64/rockpro64.c
> @@ -0,0 +1,94 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2018 Akash Gajjar <ak...@openedev.com>
Given the file is copied from another copyrighted file, you can not just
go and replace the (c) with yours.
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <dm/pinctrl.h>
> +#include <dm/uclass-internal.h>
> +#include <asm/arch/periph.h>
> +#include <power/regulator.h>
> +#include <spl.h>
> +
> +int board_init(void)
> +{
> + struct udevice *pinctrl, *regulator;
> + int ret;
> +
> + /*
> + * The PWM do not have decicated interrupt number in dts and can
dedicated?
This whole file seems to just be a copy of
board/rockchip/evb_rk3399/evb-rk3399.c. Maybe you can abstract and share
code?
But please double check if what they do is actually necessary on
RockPro64 first.
Alex
> + * not get periph_id by pinctrl framework, so let's init them here.
> + * The PWM2 and PWM3 are for pwm regulater.
> + */
> + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
> + if (ret) {
> + debug("%s: Cannot find pinctrl device\n", __func__);
> + goto out;
> + }
> +
> + /* Enable pwm0 for panel backlight */
> + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM0);
> + if (ret) {
> + debug("%s PWM0 pinctrl init fail! (ret=%d)\n", __func__, ret);
> + goto out;
> + }
> +
> + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2);
> + if (ret) {
> + debug("%s PWM2 pinctrl init fail!\n", __func__);
> + goto out;
> + }
> +
> + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM3);
> + if (ret) {
> + debug("%s PWM3 pinctrl init fail!\n", __func__);
> + goto out;
> + }
> +
> + ret = regulators_enable_boot_on(false);
> + if (ret)
> + debug("%s: Cannot enable boot on regulator\n", __func__);
> +
> + ret = regulator_get_by_platname("vcc5v0_host", ®ulator);
> + if (ret) {
> + debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret);
> + goto out;
> + }
> +
> + ret = regulator_set_enable(regulator, true);
> + if (ret) {
> + debug("%s vcc5v0-host-en set fail!\n", __func__);
> + goto out;
> + }
> +
> +out:
> + return 0;
> +}
> +
> +void spl_board_init(void)
> +{
> + struct udevice *pinctrl;
> + int ret;
> +
> + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
> + if (ret) {
> + debug("%s: Cannot find pinctrl device\n", __func__);
> + goto err;
> + }
> +
> + /* Enable debug UART */
> + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
> + if (ret) {
> + debug("%s: Failed to set up console UART\n", __func__);
> + goto err;
> + }
> +
> + preloader_console_init();
> + return;
> +err:
> + printf("%s: Error %d\n", __func__, ret);
> +
> + /* No way to report error here */
> + hang();
> +}
> diff --git a/configs/rockpro64-rk3399_defconfig
> b/configs/rockpro64-rk3399_defconfig
> new file mode 100644
> index 0000000000..88422f2db4
> --- /dev/null
> +++ b/configs/rockpro64-rk3399_defconfig
> @@ -0,0 +1,78 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_TARGET_ROCKPRO64_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_FIT=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
> interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3399=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
> diff --git a/include/configs/rockpro64.h b/include/configs/rockpro64.h
> new file mode 100644
> index 0000000000..1a7e850c94
> --- /dev/null
> +++ b/include/configs/rockpro64.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2018 Akash Gajjar <ak...@openedev.com>
> + */
> +
> +#ifndef __ROCKPRO64_RK3399_H
> +#define __ROCKPRO64_RK3399_H
> +
> +#include <configs/rk3399_common.h>
> +
> +#define CONFIG_SYS_MMC_ENV_DEV 1
> +
> +#define SDRAM_BANK_SIZE (2UL << 30)
> +
> +#endif
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
